0

New Products 9/12/18 Featuring Getting Started w/ #CircuitPlaygroundExpress! @adafruit #adafruit

New Products 8 22 2018 Featuring Adafruit RGB Matrix FeatherWing Kit adafruit adafruit Adafruit Industries Makers hackers artists designers and engineers

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


3946 00

Large Long Plastic Snap Rivets – 13mm to 16mm – 10 pack: Enter the world of cardboard construction and build playful robot friends!

Instead of slapping on tape or waiting for your hot glue to warm up, you can use these Plastic Pop Rivets! So easy to install. Just poke them through the cardboard and fasten with the back piece. This will ensure clean, movable joints and attachments. You can even remove them with some effort (but they’ll hold as long as you don’t pry them apart). Read more!


3947 00

Large Short Plastic Snap Rivets – 9mm to 13mm – 10 pack: Enter the world of cardboard construction and build playful robot friends!

Instead of slapping on tape or waiting for your hot glue to warm up, you can use these Large Plastic Rivets! They have a large honkin’ 19mm diameter rivet face, for mega surface contact. They’re so easy to install. Just poke or cut a 9mm diameter hole in your cardboard, then side one half through the front, one half through the back and snap them together. This will ensure clean, movable joints and attachments. They’re strong, and nearly impossible to remove once in place. Read more!


3929 00

Canary Stainless Steel Non-Stick Cardboard Box Cutter: Cut through cardboard like butter with the Canary Box Cutter. This Japanese-made tool is perfectly engineered, way better than using scissors or a craft knife.

This is the perfect tool for cardboard-crafting-trashbot enthusiasts! Ever get annoyed when your blade gets stuck to tape or adhesive? The Canary’s fine sawtooth edge and non-stick coating take that problem out of the equation. The serrated double-edged blade makes it ideal for clean circular cuts. Its rounded chisel tip makes easy work out of peeling off stickers, making shallow cuts, or cutting packaging straps. Read more!


3943 03

The Things Gateway – 915Mhz Version: The Things Gateway is open! Come forth all ye who wish for a community-led, open-source Internet of Things smart city network. This Internet gateway router is designed by The Things Network, so you know it will work perfectly with TTN. Make a free accounts, plug it in, follow the easy step-by-step installation instructions and you’ve got yourself a LoRaWAN to Internet gateway in under 5 minutes. No setup or usage fees! Read more!


3944 00

Getting Started with Adafruit Circuit Playground Express – by Mike Barela: Coming soon! Sign up to get notified as soon as we get these in stock, hot off the press

Make: Getting Started with Circuit Playground Express is written by our friend, Mike Barela, author of GSW Adafruit Trinket. Mike is an engineer and Maker and recently joined the Adafruit team. Read more!


3859 01

4 x AA Battery Holder with Premium Jumper Header Wires: We’ve got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here’s our latest addition in classy Adafruit black: 4 x AA Battery Holder with Premium Header Wires. What’s so special about ’em? Well you can plug them right into a breadboard! No need to fight with those skinny stripped wires you normally get. Of course, you can always still solder them into a PCB. Read more!>


New Products 9/12/18 Featuring Getting Started w/ #CircuitPlaygroundExpress! @adafruit #adafruit


Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Make a robot friend with Adafruit’s CRICKIT – A Creative Robotics & Interactive Construction Kit. It’s an add-on to our popular Circuit Playground Express, FEATHER and other platforms to make and program robots with CircuitPython, MakeCode, and Arduino. Start controlling motors, servos, solenoids. You also get signal pins, capacitive touch sensors, a NeoPixel driver and amplified speaker output. It complements & extends your boards so you can still use all the goodies on the microcontroller, now you have a robotics playground as well.

Join 7,500+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython in 2018 – Python on Microcontrollers is here!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Fewer startups, and other collateral damage from the 2018 tariffs

Wearables — Light as a Worbla feather

Electronics — How to make your own magnetic field probe!

Biohacking — The State of DNA Analysis in Three Mindmaps

Python for Microcontrollers — One year of CircuitPython weeklies!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.


Leave a comment

Adafruit has a "be excellent to each other" comment policy. Help us keep the community here positive and helpful. Stick to the topic, be respectful of makers of all ages and skill levels. Be kind, and don't spam - Thank you!

Prove you are human by reading this resistor:

0Ω+/- 5%

0
0
1
2
3
4
5
6
7
8
9

0
0
1
2
3
4
5
6
7
8
9

0
0
1
2
3
4
5
6
7
8
9

5
5
10

Prove you are human by reading this resistor:


Match the sliders on the left to each color band on the resistor.

Click Here for a new resistor image.

New to electronics? Click here to learn how to read resistor values.

Or learn to read resistors by playing Mho's Resistance!