Interface JemRF Modules with #AdafruitIO | #IoT #IoTuesday


If you have JemRF products in your toolbox they’ve written up a handy guide for interfacing with Adafruit.io 🙂 Other integration documentation is provided for AWS, Google Cloud, PrivateEyePi, and more.

The JemRF Adafruit IO interface examples can be found at:

https://github.com/JemRF/Adafruit-IO

Raspberry Pi Python Tutorial

What you will need:

  1. Any model Raspberry Pi with preferably the full Raspbian distro (you can use Rasbian Lite but will need to install Python and PIP)
  2. Wireless Base Station for Raspberry Pi or Flex RF Module
  3. Any wireless sensor

What you need to know beforehand:

  1. How to operate a Raspberry Pi
  2. You have already set up your wireless base station and tested your sensor
  3. Some Python programming knowledge is preferable but not mandatory as we provide you with the source code
  4. You can review the Adafruit IO Python github page documentation here.

Read more here.


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 32,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Foxconn executive discusses the dramatically scaled back project in Wisconsin

Wearables — Look sharp with this quick tip!

Electronics — Straw Diffusers

Python for Microcontrollers — Python on Microcontrollers Newsletter: New CircuitPython and MicroPython Minor Updates and More! #Python #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — eInk Postcard, VR Spectrum Instrumentation, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Prods 6/22/22 Feat. ADS1115 16-Bit ADC – 4 Channel w. Programmable Gain Amplifier – STEMMA QT!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.