As of October 17, 2018 we are selling the updated version of the Picade Hat, which now has no-fuss female 0.1″ socket connectors to hook up your joystick and buttons.
Pimoroni has taken all the great features of the Picade PCB and crammed them onto this super Picade X HAT. It’s the best, easiest way to make a super-sweet arcade system using any Raspberry Pi.
Simply pop it onto your Pi, plug your Pi power supply into the micro-USB connector on the Picade HAT (it back-powers your Pi through the GPIO, so no need for a separate power supply), wire up your controls to the terminal blocks, and install their driver! It’s ideal for your own custom arcade builds or interfaces that need big colorful buttons.
I2S audio DAC with 3W amplifier (mono) for great quality sound
Safe power on/off system
Micro-USB connector for power (back-powers your Pi)
4-way digital joystick inputs
6 x game button inputs
4 x utility button inputs
1 x soft power switch input
1 x power LED output
Breakout pins for other GPIO features
The I2S DAC blends both channels of digital audio from the Raspberry Pi into a single mono output. This is then passed through a 3W amplifier to power any connected speaker.
The board also features a soft power switch that allows you turn your Pi on and off safely without risk of SD card corruption. Simply tap the connected button to start up, and press and hold it for 3 seconds to fully shutdown and disconnect power.
Eink, E-paper, Think Ink – Collin shares six segments pondering the unusual low-power display technology that somehow still seems a bit sci-fi – http://adafruit.com/thinkink
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.