Browse through all that’s new here!
NEW PRODUCTS THIS WEEK
USB Mini B Male Plug to 5-pin Terminal Block: Make your next custom USB cable a breeze with a USB Mini B Male Plug to 5-pin Terminal Block. If you need to connect to a device with a mini USB socket or maybe make your own custom cable of sorts – this adapter will come in very handy: no soldering required! Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. See more!
USB Mini B Female Socket to 5-pin Terminal Block
USB Micro B Female Socket to 5-pin Terminal Block
USB Micro B Male Plug to 5-pin Terminal Block
Medium Push-Pull Solenoid – 5V or 6V: Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end, or push from the other. See more!
13.56MHz RFID/NFC Card – NTAG203 Chip: This is a blank 13.56MHz RFID/NFC Card with an NTAG203 chip – often used for train/bus passes, information sharing, contactless payment, but also found in other systems where a proximity card is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. See more!
Mini Soft Touch Push-button Switches (6mm square) x 10 pack: Put your project in stealth mode with these super slim, super tiny, and silent Mini Soft Touch Push-button Switches.
They’re less ‘clicky’ than tactile switches, they have a rubbery elastomer that feels good to press. No dangly spider-leg-pins to solder as these buttons are SMD. We see these often in little game arcade pad layouts due to their small size and soft feel. See more!
Adafruit Feather nRF52840 Express: The Adafruit Feather nRF52840 Express is the new Feather family member with Bluetooth Low Energy and native USB support featuring the nRF52840! It’s our take on an ‘all-in-one’ Arduino-compatible + Bluetooth Low Energy with built in USB plus battery charging. With native USB it’s even ready to join the CircuitPython party. We have other boards in the Feather family, check’em out here. See more!
T-Slot Photo Interrupter with 1 Meter Cable: This T-Slot Photo Interrupter with Cable is a simple plastic sensor with two elements – an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light across the gap, to the detector on the other side. This makes it perfect for detecting when something is in the slot. When there’s something blocking the light, the sensor turns off, when the object goes away, the sensor receives the IR light and turns on. See more!
T-Slot Photo Interrupter: This T-Slot Photo Interrupter is a simple plastic sensor with two elements – an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light across the gap, to the detector on the other side. This makes it perfect for detecting when something is in the slot – when there’s something blocking the light, the sensor turns off, when the object goes away, the sensor receives the IR light and turns on. See more!
New Products 12/19/18 @adafruit #adafruit
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter