Add a floppy disk to your Raspberry Pi #RaspberryPi #VintageComputing #RetroComputing #Floppydisks #Commodore #Acorn

floppy disks

A number of people are imaging vintage floppy disks for preservation (and a big THANK YOU to those who are!)

Some of the capture devices are rather expensive. Here we have found the bbc-fdc, a floppy disk interface for the venerable Raspberry Pi board:

This project is to allow the direct connection of floppy disk drives with 34 pin ribbon cables to the Raspberry Pi for the purpose of reading floppy disks. It controls the drive using GPIO and samples the read data pin using SPI to obtain a forensic level capture of the raw magnetic flux transitions on the floppy disk.

Initially this was to read my BBC Micro 5.25 inch disks formatted in Acorn DFS, but I’ve also been able to read and extract data from ADFS, DOS and Commodore 64 5.25 inch disks.

Top of board

The Cumana dual 5.25 inch disk drive (built November 1985) I’m using is capable of reading multiple different formats.

I’ve read both 40 and 80 track 5.25 inch disks, both using the 40/80 track selector switch on the back and also by double stepping. These tracks are spaced at 48 and 96 tpi respectively.

Single and double sided disks can be read by switching between heads during the capture process.

The BBC Micro Acorn DFS format used 40 or 80 tracks, 10 sectors per track (numbered 0 to 9), 256 bytes per sector, with FM encoding (single density). This gives a maximum data capacity for a double sided 80 track DFS disk of 409,600 bytes. However 2 sectors on each side of the disk are reserved for the catalogue.

More recently I’ve also been able to read 3.5 inch disks using a TEAC FD-235HG PC drive.

You can read more about this project and see the source code on GitHub.

A few years back we posted about another Raspberry Pi floppy reading solution. Let’s hope these efforts continue.

Do you like digital preservation? Nostalgic for floppy drives? Let us know in the comments below.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.