New Products 1/16/19 Featuring #Adafruit #LoRa Radio Bonnet with #OLED! @adafruit #radiofruit

NewImage

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


4048 00

Mini SWD 0.05″ Pitch Connector – 10 Pin SMT Box Header: We’ve carrying a new 1.27mm pitch 2×5 Mini SWD 0.05″ Pitch Connector. It’s a tinier, bite-sized version of the Box Header used on our SWD Cable Breakout Board. Instead of a full shroud, there’s a half-shroud with a key-notch. It’ll takes a lot less space on your board!

Read more.


4079 01

2×20 Socket Riser Header for Raspberry Pi HATs and Bonnets: Give yourself a lift with this 2×20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug a HAT or Bonnet or Phat on top.

Read more.


4043 00

13.56MHz RFID/NFC Bracelet – NTAG203 Chip: This is a blank 13.56MHz RFID/NFC Bracelet with an NTAG203 chip – often used for train/bus passes, information sharing, contactless payment, but also found in other systems where a proximity card is desired. The bracelet contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

Read more.


4007 00

Ultrasonic Distance Sensor – 3V or 5V – HC-SR04 compatible – RCWL-1601: If you’re like me, you’ve dreamed of being a dolphin – smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we’ll just have to make do with these handy 3V Ultrasonic Sonar Distance Sensor and a pair of flippers. These ubiquitous sensors are really common in robotics projects, but they can also be used for automation, interactive art and motion sensing. They work at about 2cm to 450cm away, but we think 10cm-250cm will get you the best results.

Read more.


4080 03

Google AIY Voice Kit for Raspberry Pi V2: Need directions to your nearest dry cleaner? Or maybe you need to send a hands-free email? Perhaps you just want to know what the weather’s like in Timbuktu. Ask your little friend – the Google AIY Voice Kit V2!

Read more.


4076 00

nRF51822 Bluetooth Low Energy Module – MDBT40-256RV3: If you have a custom PCB design and you’d like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF51822 Cortex M0 chip that comes integrated with BLE radio as well as most of the supporting circuitry and even a chip antenna. The whole thing is in a tin and comes with FCC, CE and TELEC certifications.

Read more.


4047 00

HD Magnet Viewing Film – 50x40mm: Add extra-sensory powers to your toolkit with this nifty piece of HD Magnet Viewing Film. It’s a special film that contains a ferromagnetic slurry of ultra small nickel particles that turns black when around a magnetic field. Unlike some of the older films you may remember from grade school science class, this stuff is ‘high resolution’ so you can really see the details.

Read more.


4044 01

No-Foil Flat Back Rainbow Crystals for NeoPixel LEDs – 100 pack – SS16: Bedazzle your board with these No-Foil Flat Back SS16 Rainbow Crystals. They’re a lot like the crystals you see decorating clothes, bags and phones. But unlike most crystals you can buy these have no reflective foil on the back, which means they let light shine through and sparkle. This makes them not-so-great for decorating bland or boring things, but really great for gluing onto LEDs and NeoPixels!

Read more.


4074 01

Adafruit LoRa Radio Bonnet with OLED – RFM95W @ 915MHz – RadioFruit: The latest Raspbery Pi computers come with WiFi and Bluetooth, and now you can add even more radio options with the Adafruit Radio Bonnets! Upgrade your Raspberry Pi with a LoRa / LoRaWAN radio, so it can communicate over very long distances. These bonnets plug right into your Pi and give you long range wireless capabilities to remote notes that may be battery powered. Or, you can create Internet gateways with ease.

Read more.


New Products 1/16/19 Featuring #Adafruit #LoRa Radio Bonnet with #OLED! @adafruit #radiofruit


Stay in the loop at Adafruit.com/New!

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.