0

New Project! PyPortal View Master #3DThursday #3DPrinting

Guide: https://learn.adafruit.com/pyportal-view-master

Build a digital view master using Adafruit’s PyPortal! When you pull the down on the crank, it goes through the image on the screen like a slideshow.

Use the Adafruit PyPortal libraries to display bitmap images from either the internal storage or micro SD card!

Adafruit PyPortal
https://adafru.it/4116

Adafruit PowerBoost 1000C
https://adafru.it/2465

3.7v 2000mAh Lipo Battery
https://adafru.it/2011

Slide Switch
https://adafru.it/805

3-pin JST cable
https://adafru.it/3893

Conductive Nylon Fabric Tape 5mm / 10m
https://adafru.it/3961

Mini oval speaker (optional)
https://adafru.it/3923








649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, or even use Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for MakeCode, CircuitPython, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 13,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython 2019!

Have an amazing project to share? The Electronics Show and Tell with Google Hangouts On-Air is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Charitable business and the Buy-One Give-One angle

Wearables — Stitch marks

Electronics — Potentiometer conventions

Biohacking — Vitamin-C + Gelatin for Accelerated Recovery

Python for Microcontrollers — The Top Programming Languages 2019 – Python tops the charts with a CircuitPython nod! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit

Adafruit IoT Monthly — Adafruit IO Updates, RGB Stream Deck Message Panel, and more

Microsoft MakeCode — Welcome to the MakeCode Newsletter!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.