0

New Products 3/27/19 Featuring #Adafruit #VEML7700 #LuxSensor! @adafruit #newproducts

NewImage

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


NewImage

Pink and Purple Braided USB A to Micro B Cable – 2 meter long: This cable is super-fashionable with a woven pink and purple Blinka-like pattern!

First let’s talk about the cover and over-molding. We got these in custom colors, and if you have to have visible cables, then you might as well have the nicest fabric-bound cable with an eye-catching python pattern. Perfect for connecting to your PyPortal, Circuit Playground Express, Raspberry Pi, CircuitPython board among other things.

Read more


NewImage

Snap-In Panel Mount HDMI Cable – 30cm: This panel mount cable will allow you to enclose a device that has an HDMI port. Perfect for placing your project in a secure box. Both ends have HDMI connectors, an extension cord if you will.

What’s special about this, you ask? It’s a Snap-In Panel Mount Cable – much easier than a classic panel mount cables, you don’t need screws or drills for installation.

Read more


NewImage

Snap-In Panel Mount Cable – USB C Socket to USB A Plug: This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding.

What’s special about this, you ask? It’s a Snap-In Panel Mount Cable – much easier than a classic panel mount cables, you don’t need screws or drills for installation.

Read more


NewImage

Panel Mount Cable USB C to Type A – 30cm: This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Type A plug connector, and other is a USB C socket with special over-molding.

The socket side has two mounting ‘ears’ with M3 screws installed 20mm apart. Can be used with box walls up to 0.25″ wide. If you have a thinner-walled box, simply swap out the M3 screws for shorter ones.

Read more


NewImage

Panel Mount Cable USB C to Micro B Male – 30cm: This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Micro B plug connector, and other is a USB C socket with special over-molding.

The socket side has two mounting ‘ears’ with M3 screws installed 20mm apart. Can be used with box walls up to 0.25″ wide. If you have a thinner-walled box, simply swap out the M3 screws for shorter ones.

Read more


NewImage

ESP-EYE Development Board V2.1: Ever wanted to dabble in face and/or speech recognition? Espressif’s ESP-EYE is a miniature ESP32-based development board that combines a digital microphone, ESP32 (of course) with 8 MB PSRAM and 4 MB flash, and a 2 megapixel camera. There’s a few buttons and LEDs as well for basic control and configuration.

Unlike some boards, this codebase does not require internet connectivity – you don’t have to send video or audio data to ‘the cloud’ – it’s all processed on-chip!

Read more


NewImage

Adafruit VEML7700 Lux Sensor – I2C Light Sensor: Vishay has a lot of light sensors out there, and this is a nice simple lux sensor that’s easy to add to any microcontoller. Most light sensors just give you a number for brighter/darker ambient lighting. The VEML7700 makes your life easier by calculating the lux, which is an SI unit for light. You’ll get more consistent readings between multiple sensors because you aren’t dealing with some unit-less values.

The sensor has 16-bit dynamic range for ambient light detection from 0 lux to about 120 klux with resolution down to 0.0036 lx/ct, with software-adjustable gain and integration times.

Read more

New Products 3/27/19 Featuring #Adafruit #VEML7700 #LuxSensor! @adafruit

Stay in the loop at Adafruit.com/New!


Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 14,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython 2019!

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Robotics manufacturer Anki is stripped for parts

Wearables — Epoxy and foam, BFFs

Electronics — Lead-free Soldering Temperature

Biohacking — Vitamin-C + Gelatin for Accelerated Recovery

Python for Microcontrollers — See you at Supercon, Python #2 language on GitHub and more! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit

Adafruit IoT Monthly — Helping Harry's Heart, CircuitPython meets AWS IoT and more!

Microsoft MakeCode — Lenticular Art Display with Crickit

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.