Over 30 years of hardware development – An interview with Parallax, Inc. #makerbusiness

Parallax has the hardware origin story that many dream of. Chip Gracey was selling self developed hardware at 15, bailed on college, and started his own company first building expansion cards for the Apple IIGS. Parallax hit the map with their BASIC Stamp microcontroller, which was one of the early and now most prevalent microcontrollers on the market, really before “maker” electronics were even a thing.

The Gracey brothers recently joined the MacroFab podcast recounting these early days, and talked a lot about the intricacies and challenges of manufacturing, especially with regards to integrated circuit development. It’s been 32 years since Parallax was founded, and they are on the cusp of launching their latest self developed chip as a part of their Propeller 2 board (coming later this year).

The Propeller 2 cost hundreds of thousands of dollars up front, and their last design change cost $82,000! The host, Parker Dillman, commented with a hyperbolic but enlightening bit of wisdom from his earlier hardware days:

You want 1 custom chip? It’s a $100,000 dollars. You want 100,000 custom chips? It’s $100,00 dollars.

The upfront cost is huge. There needs to be a ton of research and modeling done before production even begins. Designers of the latest cutting edge chips are looking at hundreds of millions in costs to just get their first manufacturing run going. This really narrows the field on who can design new chips. With the Propeller 2, Parallax is turning away from this, sticking to their roots of accessibility and less arcane functionality.

Listen to the whole show here, there is a lot to take away and with the Propeller 2 nearly at launch, there is a lot to look forward to.


Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Chip inventories rise as demand falls

Wearables — Go insane with a membrane (button or keypad)

Electronics — Shift away from basic arithmetic

Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 8.0 RC 1 Out, Board Guides, and Much More! #CircuitPython #Python @ThePSF @micropython @Raspberry_Pi

Adafruit IoT Monthly — Cat Doorbell, Deep Algae Bloom Detector, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 02/01/23 Featuring Adafruit Floppy FeatherWing with 34-Pin IDC Connector!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.