3D Hangouts – Thumbsticks, Cranks and Hilts

The return of 3D Hangouts.

We’ll cover four of the five learn guides we released since our last live stream.

PyGamer Crank – https://learn.adafruit.com/gaming-handheld-crank/
USB Crank Project – https://learn.adafruit.com/usb-hid-crank-controller
Snapfit Case for PyGamer – https://learn.adafruit.com/pygamer-snapfit-case
PyBadge Thumbstick – https://learn.adafruit.com/pygamer-thumbstick/
Light Up PropMaker – https://learn.adafruit.com/prop-maker-light-wand

PyBadge
https://www.adafruit.com/product/4200

PyBadge LC
https://www.adafruit.com/product/3939

Mini Oval Speaker
https://www.adafruit.com/product/3923

420mah 3.7v Lipo Battery
https://www.adafruit.com/product/4236

Rotary Encoder
https://www.adafruit.com/product/377

ItsyBitsy M0 Express
https://www.adafruit.com/product/3727

Flashforge Inventor II 3D Printer
https://www.adafruit.com/product/3897

Filament for 3D Printers
https://www.adafruit.com/product/2080

Filament for 3D Printers
https://www.adafruit.com/product/2080

Ultimaker 2+
https://www.adafruit.com/product/2673

Flashforge Inventor II
https://www.adafruit.com/product/3897

3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts

Bouncing Blinka – MakeCode Arcade
https://makecode.com/_h9EdfWEu3aHH

6/27/19 community makes
https://www.thingiverse.com/make:673651 pygamer snapfit case
https://www.thingiverse.com/make:670634 pi girl 2
https://www.thingiverse.com/thing:3702359 d20 remix
https://www.thingiverse.com/make:667852 raspberry pi zero stand

6/16/19 community makes
https://www.thingiverse.com/thing:3673986 pi face case remix
https://www.thingiverse.com/make:666158/ pybadge snap fit case
https://www.thingiverse.com/make:668482 pygamer case
https://www.thingiverse.com/make:668510 pybadge case

Timelapse Tuesday:

3D Printed Belt – 3DWatsch
https://www.thingiverse.com/thing:3671312
https://www.youtube.com/watch?v=8vZMBeONd5Q

Simple 5 Cylinder Radial Engine – Pauli Reinikari
https://www.thingiverse.com/thing:3671312
https://youtu.be/koSnlnLZ740

Jointless Iris mechanism – Pascal Berger
https://www.thingiverse.com/thing:3625099
https://youtu.be/S1Zr71wIHv8









Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.