3D Hangouts – Master Sword LIVE

This week’s #3DPrinting project on Adafruit Learning System

Zelda Master Sword
https://learn.adafruit.com/zelda-master-sword/

Adafruit Feather M4 Express
https://www.adafruit.com/product/3857

Adafruit Prop-Maker (assembled)
https://www.adafruit.com/product/4145

Mini Skinny NeoPixel LED Strip (2 meters)
https://www.adafruit.com/product/2959?length=2

2200mAh battery
https://www.adafruit.com/product/1781

Mini oval speaker
https://adafru.it/3923

DIY USB female plug
https://www.adafruit.com/product/1829

DIY USB male plug
https://www.adafruit.com/product/1826

10-wire silicone cover ribbon cable
https://www.adafruit.com/product/3890

3-pin JST cable
https://www.adafruit.com/product/3893

6mm slim buttons
https://www.adafruit.com/product/1489

CircuitPython Downloads: https://circuitpython.org/

Flashforge Inventor II 3D Printer
https://www.adafruit.com/product/3897

Filament for 3D Printers
https://www.adafruit.com/product/2080

Ultimaker 2+
https://www.adafruit.com/product/2673

Flashforge Inventor II
https://www.adafruit.com/product/3897

3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts











Eink, E-paper, Think Ink – Collin shares six segments pondering the unusual low-power display technology that somehow still seems a bit sci-fi – http://adafruit.com/thinkink

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 26,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — To make it through a tough business cycle, layoffs should be a last resort

Wearables — Sticky energy

Electronics — My signal isn’t THAT noisy, is it?

Python for Microcontrollers — Python on Microcontrollers Newsletter: COVID tracking, OSHWA proposals and much more! #Python #Adafruit #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — Our Favorite IoT Projects from 2020

Microsoft MakeCode — Play MakeCode Arcade games on Raspberry Pi!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week 1/19/21 MPR121 Cap Touch Gator Breakout @adafruit @johnedgarpark #adafruit #newproductpick

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.