3D Hangouts – BLE NeoPixel Hats and Mickey Ears

This week’s #3DPrinting project on Adafruit Learning System – BLE NeoPixel Hat

Learn guide, code and build photos
https://learn.adafruit.com/circuitpython-feather-ble-neopixel-hat

Adafruit nRF52840 Feather
https://www.adafruit.com/product/4062

Mini Skinny NeoPixel Strip
https://www.adafruit.com/product/2964

500mAh battery
https://www.adafruit.com/product/1578

Crystals with no foil backing
https://www.adafruit.com/product/4044

Slide Switch
https://www.adafruit.com/product/805

3-pin JST cable – female
https://www.adafruit.com/product/4046

3-pin JST cable – male
https://www.adafruit.com/product/3893

4 wire ribbon cable silicon-core stranded
https://www.adafruit.com/product/3891

Silicone Mat
https://www.adafruit.com/product/3536

Third helping hands
https://www.adafruit.com/product/291

Stickvise
https://www.adafruit.com/product/3197

Hakko Wire Strippers
https://www.adafruit.com/product/527

Flush diagonal cutters
https://www.adafruit.com/product/152

Slice Craft Knife with Ceramic Blade
https://www.adafruit.com/product/4306

CircuitPython Downloads: https://circuitpython.org/
https://www.youtube.com/adafruit/live #3DHangouts

Flashforge Inventor II 3D Printer
https://www.adafruit.com/product/3897

Filament for 3D Printers
https://www.adafruit.com/product/2080

Ultimaker 2+
https://www.adafruit.com/product/2673

3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts

Layer by Layer – Circular Snap Fits
https://www.youtube.com/watch?v=GlMo6IWF6CY

3D Printing Projects Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_












Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 11/15/2024 Featuring Adafruit bq25185 USB / DC / Solar Charger with 3.3V Buck Board! (Video)

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython 9.2.1, What is DMA, PyConUS 2025 and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Halloween, WiLo, and more!

Maker Business – Adafruit Daily — Checking in on Intel

Electronics – Adafruit Daily — Probe Compensation

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.