Voting resources, early voting, and poll worker information - VOTE. ... Adafruit is open and shipping.
0

NEW PRODUCTS – Adafruit 4×4 NeoTrellis Feather Acrylic Enclosure + Feather M4 Kit Pack!

4352

NEW PRODUCTS – Adafruit 4×4 Trellis Feather Acrylic Enclosure + Feather M4 Kit Pack!


A super-specifically-laser-cut enclosure that turns your 4×4 ‘Trellis into a handheld light/music maker! Perfect for your next cool interface, MIDI instrument, control panel… whatever could benefit from a glow-up with an elegant black and white enclosure and with beautiful diffused colorful buttons.

Note: This is only the plastic enclosure and hardware! Looking for the rest of the set up, including the RGB Driver PCB, silicone elastomer, lipo battery, and toggle switch? Check out the complete pack here!

To complete this project you’ll need also:

If you’d like to make the board portable (say you’ve got a wireless bluetooth or WiFi feather…)

Some light soldering is required! You’ll have to solder wires to the switch as well as to the Feather

4339 kit ORIG 2019 08

Includes:

  • 1 x Black Acrylic Cutout 1.5mm thick
  • 10 x Clear Acrylic Cutouts 3mm thick
  • 4 x M3 black nylon spacers 15mm long
  • 8 x M3 black nylon screws 8mm long
  • 4 x M2.5 black nylon screws 10mm long
  • 4 x M2.5 black nylon nuts
  • 4 x M2.5 standoffs 3mm long (un-threaded)
  • 1 x set of Little Rubber Bumper Feet (4 bumpers total)

These acrylic cutouts come with paper backings on both sides (it protects the acrylic while laser cutting and shipping). You’ll need to peel those off before assembly.

Now for the complete pack!


4352 2

We’ve upgraded our popular 4×4 Trellis Keypad kit with a super-specifically-laser-cut enclosure that turns your 4×4 ‘Trellis into a handheld Feather M4 Express-powered light/music maker! Perfect for your next cool interface, MIDI instrument, control panel… whatever could benefit from a glow-up with an elegant black and white enclosure and with beautiful diffused colorful buttons.

4339 iso ORIG 2019 08

Thee 4×4 button pad board is fully assembled, tested, and communicates over I2C. With our trusty seesaw I2C-to-anything chip, you don’t even need to manage the NeoPixel driving. That’s right! Both the button management and LED driving is completely handled for you all over plain I2C. We have both Arduino/C++ and CircuitPython/Python library support.

4352 kit ORIG 2019 08

This pack contains everything you need to get started. Includes:

If you’d like to make the board portable, for untethered projects, you can pick up the optional, not included:

Some light soldering is required! You’ll have to solder wires to the Feather.

4339 side 01 ORIG 2019 08

In stock and shipping now!



Adafruit has had paid day off for voting for our team for years, if you need help getting that going for your organization, let us know – we can share how and why we did this as well as the good results. Here are some resources for voting by mail, voting in person, and some NY resources for our NY based teams as well. If there are additional resources to add, please let us know – adafruit.com/vote

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 24,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — To make it through a tough business cycle, layoffs should be a last resort

Wearables — Start with too much

Electronics — Desolder with… more solder!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Over 200 CircuitPython compatible boards! #Python #Adafruit #CircuitPython #CircuitPythonDay @micropython @ThePSF

Adafruit IoT Monthly — Mitigating Climate Change with IoT, LoRaWAN Gardens, and more!

Microsoft MakeCode — MakeCode and Wonder Woman 1984 Team Up

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — NEW PRODUCT – Adafruit Universal USB / DC / Solar Lithium Ion/Polymer charger – bq24074

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.