Browse through all that’s new here!
NEW PRODUCTS THIS WEEK
Adafruit PDM Microphone Breakout with JST SH Connector: An exotic new microphone has arrived in the Adafruit shop, a PDM MEMS Microphone! PDM is the ‘third’ kind of microphone you can integrate with electronics, apart from analog or I2S. These microphones are very commonly used in products, but are rarely seen in maker projects. Still, they have some benefits so we thought we’d offer a breakout for the shop.
Grove Shield FeatherWing for all Feathers – Wio Lite: The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed’s huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feather line!
Working with Grove requires no soldering. Just plug the sensors, actuators, or displays into this shield via a Grove cable (not included), so you can focus on coding and making!
Bots! Robotics Engineering with Hands-On Makerspace Activities – By Kathy Ceceri: We are very excited to carry a new book by Adafruit Learning System author and maker Kathy Ceceri!
Robots are everywhere! They vacuum our houses, work in our factories, help us learn at school, and play with us at home. They sample rocks from other planets, survey disaster zones from the air, and bring back images from the bottom of the ocean.
Bots! by Kathy Ceceri – Book and Parts Bundle: We wanted to offer a pack that has everything you need to follow along the book and complete the projects. Many of the parts included are common, re-usable components, so you will be able to build on what you’ve learned and come up with new inventions!
What better way to dip your maker toes into the inviting waters of electronics and robotics than with this bundle which includes goodies to follow all the chapters? No soldering required, great for any age and experience!
FTDI Serial TTL-232 USB Type C Cable: Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it’s rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer’s toolkit.
This is a USB C to TTL serial cable with an FTDI FT232R usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. Useful whenever you want to communicate with a TTL serial device such as an Arduino Pro Mini or ESP breakout, and the pinout will match up exactly to any ‘FTDI’ 6-pin header.
Rainbow Pibow Coupé 4 for Raspberry Pi 4: What’s that you say? You just received your new Raspberry Pi 4 in the mail and want to get a new colorful case? Well, you are in luck! We now have this new slim, hackable, and attractive case for your new Raspberry Pi 4! This is the classic Pimoroni rainbow case in a slim fit, so you can fit HATs, pHATs and bonnets on top.
Pimoroni Fan SHIM for Raspberry Pi: Looking for another way to keep your Raspberry Pi cool? Hook up Pimoroni’s miniature 5V Fan SHIM and prevent your hard-working Pi from overheating! It’ll keep your Pi running at top performance and it’s stealthy-silent. The software will turn on the fan only when necessary, and has an RGB LED status indicator as well.
Designed for use with the high-power Raspberry Pi 4, but will also work just fine with the 3 B+ and 3 A+
The Things Indoor LoRaWAN WiFi Gateway – 8 Channel LoRa 900 MHz: Meet the affordable 8 Channel LoRa gateway from TTN, The Things Indoor Gateway! Simple name for a straight-to-the point product. It’s the new low cost, indoor multi-channel LoRaWAN gateway designed by The Things Network, so you know it will work perfectly with TTN. Make a free account, plug it in, follow the easy step-by-step installation instructions and you’ve got yourself a LoRaWAN to Internet gateway in under 5 minutes. No setup or usage fees.
Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit – with 2×20 Header: We put a PermaProto half-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection – the 40-Pin PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2×20 box header in, and you get all the labeled breakouts with extra prototyping space, power rails, mounting holes and that gorgeous silk.
This version is for modern Raspberry Pi computers with 2×20 connectors such as the Pi B+, A+, 2, 3, 4, Zero, etc! We also stock a version for the older Pi 1’s with 2×13 headers.
Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit – with 2×20 Header: We put a PermaProto full-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection – the 40-Pin PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2×20 box header in, and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk.
This version is for modern Raspberry Pi computers with 2×20 connectors such as the Pi B+, A+, 2, 3, 4, Zero, etc! We also stock a version for the older Pi 1’s with 2×13 headers.
New Products 8/28/2019 Featuring #Adafruit Perma-Proto 40-Pin Rasp Pi PCB Kits w/ 2×20 Header
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
