0

Adafruit Mini PiTFT – 135×240 Color TFT Add-on for Raspberry Pi @adafruit @raspberry_pi #raspberrypi

4393

4393-00

4393-04

4393-02

4393-01

Adafruit Mini PiTFT – 135×240 Color TFT Add-on for Raspberry Pi – If you’re looking for the most compact li’l color display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need!

The Adafruit Mini PiTFT – 135×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full color 240×135 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case.

This display is super small, only about 1.14″ diagonal, but since it is an IPS display, its very readable with high contrast and visibility. We had a little space on the top so we give you two tactile buttons on GPIO pins so you can create a simple user interface. On the bottom we have a Qwiic/STEMMA QT connector for I2C sensors and device so you can plug and play any of our STEMMA QT devices.

Using the display is very easy, we have a kernel driver and Python library for the ST7789 chipset. You can set it up as a console output so you can have text and user interface through the Raspberry Pi OS or you draw images, text, whatever you like, using the Python imaging library. Our tests showed ~15 FPS update rates so you can do animations or simple video.

Comes completely pre-assembled and tested so you don’t need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer.

Get one now, if it’s out of stock, sign up to get one when its back in stock, these are going to move FAST!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 15,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython 2019!

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/


Maker Business — Patreon: 4 million patrons, $1 billion in payouts

Wearables — Shake it off

Electronics — Switch Mode Power

Biohacking — Vitamin-C + Gelatin for Accelerated Recovery

Python for Microcontrollers — 200 CircuitPython Libraries, Binho, BLE, and more! #Python #Adafruit #CircuitPython #PythonHardware @circuitpython @micropython @ThePSF @Adafruit

Adafruit IoT Monthly — Machine Learning 101, PWNing the ESP32, and more!

Microsoft MakeCode — Deep Breathing Encouragement with Circuit Playground Express!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



2 Comments

  1. as i was thinking of this small hi-res display suddenly a small Fresnel lens drifted into my mind.
    anyone tried it out ?
    keep up the great work, love those hi-res displays. 🙂

  2. Can you provide a link to the kernel driver and python library?

Sorry, the comment form is closed at this time.