NEW PRODUCTS – SmartiPi Touch 2 – Stand for Raspberry Pi 7″ Touchscreen Display Compatible with Pi 4 and Small & Large Back Covers

4377 hand demo ORIG 2019 10

NEW PRODUCTS – SmartiPi Touch 2 – Stand for Raspberry Pi 7″ Touchscreen Display Compatible with Pi 4 and Small & Large Back Covers


Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7″ Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch 2 which has a ton of new goodies like Pi 4 compatibility, various front-pieces for adding LEGO brick compatibility, and even a fan and mount!

The 7″ Display is secured into the case with four screws, and your Raspberry Pi is enclosed in a compartment on the back of the case. A simple door covers the Pi in the compartment allowing for the display ribbon cable to connect to the Raspberry Pi DSI port.

For Pi 4, use the USB C splitter cable. For Pi’s 2 and 3, use the Micro USB splitter cable.

4377 detail 01 ORIG 2019 10

4377 detail 02 ORIG 2019 10

4377 detail 03 ORIG 2019 10

4377 kit ORIG 2010 10

Features:

  • Adjustable angle
  • Building block compatible front plate with camera hole
  • Smooth front plate with camera hole
  • Smooth front plate
  • Door with included 30x30mm fan
  • Door with GPIO access
  • USB-C splitter (for use with Pi 4)
  • Micro USB splitter (for use with Pi 2 and 3)
  • Compact mounts
  • 75mm VESA mounting
  • HDMI and audio port access
  • Compatible with Raspberry Pi B+, 2B, 3B, 3A+, 3B+, and 4
  • Compatible with the Raspberry Pi camera V1 and V2
  • Compatible with the Official Raspberry Pi Display

Note: Raspberry Pi, display, and power supply are NOT included! 

4377 iso ORIG 2019 10

Moving onto the Small 15mm Back Cover!


4379 iso ORIG 2019 10

4379 iso ORIG 2019 10 copy

Need a smart solution for covering the back of your SmartiPi Touch 2 display stand? This simple cover from SmartiPi screws into the back VESA mounts on the SmartiPi Touch 2 with the four included screws. It allows you to protect HAT boards and other electronic components that you might want for your project. It’s made of ABS plastic and will have to be cut, drilled, or modified for your application. The case also helps protect the ethernet and USB ports on the Pi B+, 2, 3, and 4.

4379 kit ORIG 2019 10

4379 detail 01 ORIG 2019 10

The 7″ Touchscreen DisplaySmartiPi Touch stand, and Raspberry Pi are not included. These are add-ons that let you have a nice protective back for your Pi+HAT combo!

Please note: This cover does not work with the plain door or the fan door. You will have to modify it if you want it to work with the back door.

This cover is only for use with the SmartiPi 2 – it doesn’t fit the original SmartiPi 1

This is the Small 15mm deep cover, but we also offer SmartiPi Touch 2i’s Large 35mm deep cover.


4378 iso ORIG 2019 10

4378 iso ORIG 2019 10 copy

Need a smart solution for covering the back of your SmartiPi Touch display stand? This simple cover from SmartiPi screws into the back VESA mounts on the SmartiPi Touch with the four included screws. It allows you to protect HAT boards and other electronic components that you might want for your project. It’s made of ABS plastic and will have to be cut, drilled, or modified for your application. The case also helps protect the ethernet and USB ports on the Pi B+, 2, 3, and 4.

This is the Large 35mm deep cover, but we also offer SmartiPi Touch 2’s Small 15mm deep cover.

4378 kit ORIG 2019 10

The 7″ Touchscreen DisplaySmartiPi Touch stand, and Raspberry Pi are not included. These are add-ons that let you have a nice protective back for your Pi+HAT combo!

Please note: This cover does not work with the plain door or the fan door. You will have to modify it if you want it to work with the back door.

This cover is only for use with the SmartiPi 2 – it doesn’t fit the original SmartiPi 1

4378 detail 01 ORIG 2019 10

In stock and shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.