New Products 11/06/19 Featuring #Adafruit Mini #GPS PA1010D UART & I2C – #STEMMA QT! @Adafruit #newproducts


IScreen Shot 2018 05 04 at 7 44 26 AM 1 png

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


4400 15

Adafruit EdgeBadge – TensorFlow Lite for Microcontrollers: Machine learning has come to the ‘edge’ – small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations.

But you don’t need super complex hardware to start developing your own TensorFlow models! We’ve adapted our popular PyBadge board to add a microphone so you can dip your toes into machine learning waters. It does everything that the PyBadge does, and as we make more projects that use Machine Learning we’ll adapt this board to make it better and better for machine learning.

Read more


4349 02

EVA Foam Pack in Rainbow Colors – 2mm thick – 10 sheets: EVA foam is one of the best and easiest go-to materials for constructing costumes and props. It’s light, inexpensive, versatile, and can easily be cut and heat-shaped for a snug fit. With enough time, patience, and the right tools, EVA foam can be finished to look like nearly any material. Use to create costume armor, headpieces, prop weapons, and other accessories.

Read more


3886 00

Adafruit MPU-6050 6-DoF Accel and Gyro Sensor – STEMMA QT Qwiic: I mew, you mew we all mew for IMU! The MPU-6050 is what we call “an oldie but goodie” – this popular triple axis accelerometer plus gyro combo has been a staple of electronic projects for years, and we’ve finally gotten around to making a breakout for it!

Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a gyroscoe that can sense how fast the board is being twisted around. By combining this data you can tell how your project is moving through space

Read more


4413 00

Adafruit LSM303AGR Accelerometer Magnetometer – STEMMA QT Qwiic: Do you know which way the wind blows? You will now, with this triple-axis accelerometer/magnetometer compass module. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient your project!

Read more


4415 05

Adafruit Mini GPS PA1010D – UART and I2C – STEMMA QT: This miniature GPS breakout is only 1″ x 1″ (~ 25mm x 25mm) but houses a complete GPS/GNSS solution with both I2C and UART interfaces. There’s even an antenna on top so it’s plug and play!

Read more

New Products 11/06/19 Featuring Adafruit Mini GPS PA1010D UART & I2C – STEMMA QT!

Stay in the loop at Adafruit.com/New!

NewImage 43

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.