NEW PRODUCTS – JST PH 3-pin & 4-pin Horizontal & Vertical Connectors (10-packs) – STEMMA

4389 4390 4391 4392

NEW PRODUCTS – JST PH 3-pin & 4-pin Horizontal & Vertical Connectors (10-packs) – STEMMA


We’ve got a plethora of 10-packs of STEMMA connectors. First up, the JST PH 3-pin Horizontal Connectors!

4391 iso kit ORIG 2019 11

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here’s a pack of 10 of our favorite 2mm pitch connector – the JST PH 3 pin. These are the horizontal style.

You can use these with any of our JST PH 3 / STEMMA cables. They’re not STEMMA QT compatible (those use the smaller JST SH).

For more information about JST PH connectors, visit the JST website

4391 iso detail ORIG 2019 11

4391 quarter ORIG 2019 11

4391 iso demo ORIG 2019 11

We also carry these connectors in vertical style, and they’re next up!


4389 iso kit ORIG 2019 11

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here’s a pack of 10 of our favorite 2mm pitch connector – the JST PH 3 pin. These are the vertical style.

You can use these with any of our JST PH 3 / STEMMA cables. They’re not STEMMA QT compatible (those use the smaller JST SH).

We also carry these connectors in horizontal style.

For more information about JST PH connectors, visit the JST website

4389 quarter ORIG 2019 11

4389 iso demo ORIG 2019 11


Now for the 4-pins, starting with the horizontal connectors again!

4392 iso kit ORIG 2019 11

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here’s a pack of 10 of our favorite 2mm pitch connector – the JST PH 4 pin. These are the horizontal style.

You can use these with any of our JST PH 4 / STEMMA cables. They’re not STEMMA QT compatible (those use the smaller JST SH). However, you can fit Seeed Grove connectors into JST PH which is pretty handy.

For more information about JST PH connectors, visit the JST website

4392 iso detail ORIG 2019 11

4392 quarter 02 ORIG 2019 11

4392 iso demo ORIG 2019 11

We also carry these connectors in vertical style, which are last but not least!


4390 iso kit ORIG 2019 11

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here’s a pack of 10 of our favorite 2mm pitch connector – the JST PH 4 pin. These are the vertical style.

You can use these with any of our JST PH 4 / STEMMA cables. They’re not STEMMA QT compatible (those use the smaller JST SH). However, you can fit Seeed Grove connectors into JST PH which is pretty handy.

For more information about JST PH connectors, visit the JST website

4390 iso detail ORIG 2019 11

4390 iso demo ORIG 2019 11

4390 quarter ORIG 2019 11

In stock and shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.