2019 3DPrinting Projects #3DThursday #3DPrinting

Here are just some of the 3d printing projects for 2019!

Astrolite NeoPixel Upgrade
https://learn.adafruit.com/astrolite-neopixel-upgrade

Prop-Maker Keyblade
https://learn.adafruit.com/propmaker-keyblade

Robotic Creatures
https://learn.adafruit.com/robotic-creatures

Heat Set Insert Rig
https://learn.adafruit.com/heat-set-rig

Light Up Prop with Prop-Maker
https://learn.adafruit.com/prop-maker-light-wand

PyBadge GamePad
https://learn.adafruit.com/pybadge-gamepad

3D Printing on Diffraction Grating Sheets
https://learn.adafruit.com/3d-printing-on-diffraction-grating-sheets

PyGamer – Gaming Handheld Crank
https://learn.adafruit.com/gaming-handheld-crank

NeoTrellis Sound Board
https://learn.adafruit.com/neotrellis-soundboard

Zelda Master Sword
https://learn.adafruit.com/zelda-master-sword

CircuitPython BLE Controlled NeoPixel Hat
https://learn.adafruit.com/circuitpython-feather-ble-neopixel-hat

SpaceX Helmet
https://learn.adafruit.com/spacex-helmet

Cranky Adabot Solder Dispenser
https://learn.adafruit.com/cranky-adabot-solder-dispenser

NeoPixel LED Mickey Ears
https://learn.adafruit.com/neopixel-led-mickey-ears

Monster M4SK Antenna Eyes
https://learn.adafruit.com/antenna-eyes

Cappy Monster M4sk with Animated Eyes
https://learn.adafruit.com/cappy-monster-m4sk

Circuit Playground Bluetooth Cauldron
https://learn.adafruit.com/cpx-cauldron

CircuitPython Animated Sprite Pendants
https://learn.adafruit.com/circuitpython-sprite-animation-pendant-mario-clouds-flying-toasters

Circuit Playground Gizmo Ornaments
https://learn.adafruit.com/display-ornaments-with-circuit-playground

Watchmen’s Sister Night NeoPixel Goggles
https://learn.adafruit.com/watchmen-sister-night-circuitpython-neopixel-goggles

CircuitPython Motorized Camera Slider
https://learn.adafruit.com/circuitpython-motorized-camera-slider

Rezz-Inspired NeoPixel Glasses
https://learn.adafruit.com/rezz-inspired-neopixel-glasses

LEGO Head Lamp with Audio
https://learn.adafruit.com/lego-head-lamp-with-audio

PyPortal Wall Mount
https://learn.adafruit.com/pyportal-wall-mount

eInk FeatherWing Display Stand
https://learn.adafruit.com/eink-featherwing-display-stand

HalloWing Macintosh
https://learn.adafruit.com/hallowing-mac

PyPortal View Master
https://learn.adafruit.com/pyportal-view-master

 


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Philips, an electronics giant, has faded from its former glory

Wearables — Capture sounds

Electronics — Audio amplifier advice

Python for Microcontrollers — Python on Microcontrollers Newsletter: MicroPython Pico W Bluetooth, CircuitPython 8.0.4 and much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Boxing Glove Tracker, Disconnecting Smart Appliances, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProducts 3/15/23 Feat. Adafruit CAN Bus FeatherWing – MCP2515!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.