The Raspberry Pi PCB ruler now on Kickstarter #RaspberryPi #Rulers #PCBs @Raspberry_Pi

Ian Dunn has a Kickstarter going for a PCB ruler which includes the Raspberry Pi pinout. He writes:

The moment I learned about PCB rulers I had to have one. But no PCB ruler that I could find on the internet was quite what I wanted, so I made my own! I put quite a bit of time and effort into perfecting this ruler, and I think the end product is really nifty. So, it seemed like a shame not to share it.

These rulers are rather expensive to manufacture in small batches, so I need your help! At minimum, I can sell the prototype batch that I already have manufactured, but I would really like to manufacture 1000 or more rulers.

I crammed every piece of information about the Raspberry PI and electronics that I could onto the ruler. My goal was to put every pin out, and formula that I use from time to time but I don’t quite remember in one easy place.

It’s exactly the right size to fit into a shirt pocket, and it’s very attractive. The finish is lead free ENIG (Electroless Nickel Immersion Gold.) The circuit board material is FR-4 with green solder mask.

See this article and the Kickstarter itself.

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 35,000+ makers on Adafruit’s Discord channels and be part of the community!

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more

CircuitPython – The easiest way to program microcontrollers –

Maker Business — Challenges in trade between China and U.S. highlighted by forced labor bill

Wearables — There are some limits to conductive thread

Electronics — = != ==.

Python for Microcontrollers — Python on Microcontrollers Newsletter: Retrofitting old computers, Pinguin and much more! #CircuitPython @micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — BBQ Smoker, Emoji Telegraph, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week 9/27/22 NeoPixel Goggles Kit @adafruit @johnedgarpark #adafruit #newproductpick

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at !

No Comments

No comments yet.

Sorry, the comment form is closed at this time.