3D Hangouts – Pyloton, Props and Guitars #3DPrinting

Learn Guide
https://learn.adafruit.com/adafruit-clue
https://learn.adafruit.com/pyloton
https://youtu.be/viR-2dUP55g
https://www.thingiverse.com/thing:4198987

#3DPrinting Live Project Video
https://youtu.be/viR-2dUP55g #3DHangouts

Adafruit Clue
https://www.adafruit.com/product/4500

400mah Battery
https://www.adafruit.com/product/3898

420mah Battery
https://www.adafruit.com/product/4236

350mah Battery
https://www.adafruit.com/product/4237

CircuitPython Downloads: https://circuitpython.org/
https://www.youtube.com/adafruit/live #3DHangouts

3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts

Last week – CPB video
Wearable wristband – https://learn.adafruit.com/circuit-playground-wearable
STLs – https://www.thingiverse.com/thing:1682293

Liz’s BLE Synth PCB https://learn.adafruit.com/ble-synth-with-the-feather-nrf52840-and-circuit-playground-bluefruit

Timelapse Tuesday:
https://youtu.be/E6u-kWv19Rg
Golden Snitch – Quentin ROUTHIAU
https://www.thingiverse.com/thing:4153312

Dalek – William Carver
https://www.thingiverse.com/thing:505469
https://youtu.be/3-6s1Bcp56M

3/4/20 community makes
https://www.thingiverse.com/thing:4192124 gizmo cpx remix
https://www.thingiverse.com/make:769318 cpx snap fit mount
https://www.thingiverse.com/make:769521 rezz glasses

2/20/20 community makes
https://www.thingiverse.com/make:762116 hylian shield
https://www.thingiverse.com/make:762656 tft gizmo turtle

3D Printing Projects Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Milling Monday
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVL48weqeHiu7aw-_sPhCSA


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!





Halloween season is here!
Halloween season is here! Check out all the posts, gift guides, and more!

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 10/30/24 Adafruit LPS28 (LPS28DFW) Pressure Sensor – STEMMA QT / Qwiic

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: New Raspberry Pi Products, 503 CircuitPython Libraries and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Halloween, WiLo, and more!

Maker Business – Adafruit Daily — First Solar’s $1.1 billion development of vertically integrated factory in the U.S.

Electronics – Adafruit Daily — Trigger happy oscilloscope?

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.