COVID-19 Drive-Thru Testing

COVID-19 test kits are slowly reaching more city health departments. Tacoma, WA received 1,000 kits from FEMA, but these will not be made available to the general public. The testing is for workers in health care, public safety and critical infrastructure. The one caveat is high risk people who are 60+ years old with existing medical conditions can also qualify for testing. The process is already full and taking place near the Tacoma Dome from 3/20 – 3/22.
Not only do you need to be essential to infrastructure, but you also need a medical providers recommendation to be tested. There is a short survey that must be filled out before testing that focuses on symptoms and occupation:
  • fever
  • cough
  • shortness of breath
My girlfriend and I have been symptomatic for the last week. She works in health care and qualified to be tested which means I get to indirectly find out if I too am positive for COVID-19.
The approach to the Tacoma Dome was over half a mile of blocked of roads and police verifications. You quickly get used to cracking the window just enough to hear the voice of the person on the other side and pressing ID cards up to the window to verify who you are for the appointment.
After three ID checks we were actually driving inside the Tacoma Dome and were given a short consent form that needed to be verbally acknowledged. At this point the car window needs to be fully rolled down and the person administering the test who is in a bunny suit with faceshield asks my girlfriend to blow her nose into a handkerchief (which she keeps). The next part is the hard part. My girlfriend is asked to sit on her hands and resist any temptation to interrupt the nasopharyngeal swabbing process. A long thin plastic q-tip instrument is inserted deep into her nose and behind it to obtain a sample from the nasopharynx (a painful process). It takes less than 20 seconds to obtain a sample. Results take 4-6 days.

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. Good luck to both of you. Thank you for sharing the process with the rest of us.

Sorry, the comment form is closed at this time.