A weatherproof case for Feather boards #Feather @MCCI

MCCI Corporation has announced new weatherproof cases sized to fit circuit boards in the Feather form factor.

This sealed, gasketed case not only protects boards from the elements, but it includes all the required mounting hardware for boards compatible with the Adafruit Feather system, including MCCI Catena® boards like the 4610, 4612, 4801 and 4470.

Shown in these photographs with an MCCI Catena 4801, the case includes a removable plexiglass base-plate, standoffs and related hardware. The case also includes cable glands to allow entry for field wiring or power.

Notes:

  • This case does not come with a Feather / Catena board or other electronics; those are sold separately.
  • The case is sealed, and therefore environmental sensors will not track the external conditions as closely as they will with a ventilated case.

Specifications:

  • Material: ABS plastic.
  • External dimensions: 100 x 68 x 36mm
  • Cable glands: 2 x PG-7
  • Recommended cable sizes: 0.118″ – 0.169″ diameter
  • Mounting hole diameter: 6mm
  • Center-to-center: 42mm
  • Dimensional drawings: casecover.

See the MCCI page for more on the case.

Note: Adafruit doesn’t carry this case at this time.

Model 4050 Weatherproof Case for Feather-system Boards


Eink, E-paper, Think Ink – Collin shares six segments pondering the unusual low-power display technology that somehow still seems a bit sci-fi – http://adafruit.com/thinkink

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 26,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — To make it through a tough business cycle, layoffs should be a last resort

Wearables — Sticky energy

Electronics — My signal isn’t THAT noisy, is it?

Python for Microcontrollers — Python on Microcontrollers Newsletter: COVID tracking, OSHWA proposals and much more! #Python #Adafruit #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — Our Favorite IoT Projects from 2020

Microsoft MakeCode — Play MakeCode Arcade games on Raspberry Pi!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week 1/19/21 MPR121 Cap Touch Gator Breakout @adafruit @johnedgarpark #adafruit #newproductpick

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.