New Products 4/8/2020 Featuring Standard Adult #DisposableMasks – Blue Surgical-Style – 50 pk!

Screen Shot 2018 05 04 at 7 44 26 AM

We’ve got the New nEw NEW for you right here:


Medium Black Nitrile Disposable Gloves – 100 Piece Glove Box

Here is a 100-pack of black nitrile disposable gloves. These medium-sized gloves will fit hands approximately 8.1cm to 9cm wide.

Read more

KN95 Filtering Face Mask (1 Piece)

This KN95 Face Mask is made of strong filter material, is easy to wear, and can be re-used if carefully removed and stored in a paper bag after each use. Don’t share this mask, one mask per person only! Afterward, they should be carefully removed and thrown out. Please check this document for information on how to put on and safely remove a face mask.

Read more

Finger Pulse Oximeter with Bluetooth LE – BM1000

This Finger Pulse Oximeter with Bluetooth LE is great for monitoring your blood oxygen levels and pulse rate. Simply plug your fingerpad onto the sensor and see the readout on the OLED display. The blue number is your pulse, and the red is SpO2, the estimate of the amount of oxygen in your blood. This version includes Bluetooth LE connectivity so you can send your bio-data to your laptop, tablet, or smart phone. Note that this item is not designed for continuous SpO2 measurements, its best for short data collections.

Read more

Disposable Face Shields with Anti-Fog Coating

This fully-assembled disposable face shield design is made of die cut PET, soft foam and elastic. Unlike 3D-printed shields, they have no large gaps at the top where aerosols can fall through. The shield has an anti-fog coating so it will stay nice and clear during use. The shields are designed for one-time usage, the clear plastic piece can be cleaned with soapy water or alcohol to sanitize but it may reduce the anti-fog coating.

Read more

Standard Adult Disposable Masks – Blue Surgical-Style – 50 pk

Here is a 50 pack of disposable PPE face masks for adults. The masks are lightweight, breathable, and constructed with 3 ply layers just like the larger surgical-style masks. These masks are 175mm x 95mm (6.8″ x 3.75″). If you’re looking for smaller, child-sized masks, we have them here.

Read more

Personal Protection Isolation Gown – 4 Pack

This lightweight, multi-purpose, disposable gown is fitted with waist ties and elastic cuffs to provide a snug fit. For individual use only, not certified for medical users.

Read more

Contact-less Infrared Digital Thermometer – Fever Scanner

This handheld digital thermometer with built-in infrared remote temperature sensor is perfect for quickly and easily checking folk’s temperatures. There is no skin contact and no need to worry about disinfecting or sticking under your tongue, ear, or elsewhere. It’s super fast, get a reading in a second!

Read more

Child-Size Small Disposable Masks – Blue Surgical-Style – 20 pk

Here is a 20-pack of disposable PPE face masks for kids or those with smaller heads. The masks are lightweight, breathable, and constructed with 3 ply layers just like the larger surgical-style masks. These masks are 145mm x 95mm (5.5″ x 3.75″) instead of the standard size 175mm x 95mm (6.8″ x 3.75″) so they fit better on very small/child faces.

Read more

Urban Commuter Hat with Vinyl Face Shield

This fashionable topper is a lovely protective hat, with a wide brim for UV protection and an attached clear vinyl face shield that won’t fog up! A great pairing with a face shield, your eyes and face will be protected from spit & splash.

Read more

Visit for more info.

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here:

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in!

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community!

CircuitPython – The easiest way to program microcontrollers –

Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at !

No Comments

No comments yet.

Sorry, the comment form is closed at this time.