There is a slim duct that travels up the inside of the right side assembly to hide the fan wires and still allow it to pivot. The fan I used has very slim wires and pushing 2 of the 3 wires needed to operate the fan wasn’t an issue. But you may want to take this into consideration if your fan uses thicker wires.
On/Off Switch – note the 3D model doesn’t have a hole for this since I used a large switch. You can drill and add your own size switch after printing.
The fan fits very snug inside the case so I didn’t bother with screwing it down – but the holes as there (3mm) if you want to
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
8-6-2021 (August 6, 2021) is the Snakiest day of the year and it’s also this year’s CircuitPython Day! The day highlights all things CircuitPython and Python on Hardware. See you there!
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.