NEW GUIDE: Homefruit FeatherWing Tester #AdafruitLearningSystem #Feather @adafruit

NEW GUIDE in the Adafruit Learning System: Homefruit FeatherWing Tester

Every Adafruit board needs a tester to ensure that the hardware works before it’s placed in the Adafruit store. These testers generally consist of a board with a pre-programmed microcontroller to administer the test, and an array of spring loaded contacts, often called “pogo pins”, to mate with the device under test.

Are you doing your own small scale manufacturing? Do you just want to get your code working before soldering headers on that FeatherWing? Either way, this guide is for you.

In this guide, you’ll learn how to make your own tester for Feather/FeatherWing form factor boards.

Check it out…



Maker Business — Pololu’s account of the chip shortage

Wearables — Make it sticky

Electronics — Your job’s a joke, you’re broke, your semiconductor is DOA

Python for Microcontrollers — Python on Microcontrollers Newsletter: Raspberry Pi Pico turns one and more! #Python #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — 2021 in Recap!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — NEW PRODUCT – ESP32­-S3­-DevKitC-1 – ESP32-S3-WROOM-2 – 32MB Flash 8MB PSRAM

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.