Adafruit Matrix Portal Back Case #3DThursday #3DPrinting

Adafruit Matrix Portal Back Case by twistedgeek Thingiverse

Add some protection to your Matix projects with this back cover shared by twistedgeek on Thingiverse:

A back cover for the Adafruit Matrix Panel 32×64 as seen here – https://www.adafruit.com/product/2278

The back cover protects the wires and matrix portal board in the back of the matrix panel.

The panel was included in the October 2020 Adabox 016 kit here – https://www.adafruit.com/product/4812

Make sure it is for the 32×64 panel RGB matrix 4mm pitch which measures 255mm x 127mm.

To attach onto the matrix panel use (6) M3x16 screws.

The print has a slot for the control board to extend out the one side.

About a 24 hour print on normal quality.

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 28,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — To make it through a tough business cycle, layoffs should be a last resort

Wearables — Plastic discoloration? Don’t despair!

Electronics — Lower power!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Happy 8th Birthday MicroPython, sponsorship and more! #Python #Adafruit #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — IoT Pool Monitor, Edge AI, and more!

Microsoft MakeCode — MakeCode Arcade Spring Update

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 5/5/2021 featuring Adafruit I2C QT Rotary Encoder with NeoPixel – STEMMA QT / Qwiic! (Video)

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.