The RISC-V Powered BeagleV Board announced #RISCV #OpenSource @beagleboardorg

BeagleBoard.Org has announced a collaboration with SeeedStudio and StarFive to make the open source BeagleV™— an affordable 64-bit multicore RISC-V credit-card sized computer designed to run Linux.

Some of the specifications:

Processor

  • RISC-V U74 Dual core with 2MB L2 cache @ 1.0GHz
  • Vision DSP Tensilica-VP6 for computing vision
  • NVDLA Engine 1 core (configuration 2048 MACs@800MHz )
  • Neural Network Engine (1024MACs@500MHz)
Memory
  • 8GB LPDDR4 (2 x 4GB LPDDR4 SDRAM)

Peripherals

  • 4 x USB 3.0 Ports
  • 1 x Gigabit Ethernet
  • 1 x 3.5mm Audio jack
  • Support TRNG and OTP
  • Support DMAC, QSPI and other peripheral
  • Dedicated Audio Processing DSP and sub-system
  • 40 Pin GPIO Header (28 x GPIO, I2C, I2S, SPI, UART)
  • System boot from SD card
  • 1 x Wi-Fi 2.4GHz b/g/n and Bluetooth 4.2
  • Power with USB Type-C (5V@3A)
  • 1 x Reset button and 1 x Power Button

Read more

Halloween season is here!
Halloween season is here! Check out all the posts, gift guides, and more!

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — NEW PRODUCT – Snap-on Enclosure for Adafruit Feather RP2040 USB Host

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: New Python Releases, an ESP32+MicroPython IDE and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Garden Lights, Bluetooth 6.0, and more!

Maker Business – Adafruit Daily — First Solar’s $1.1 billion development of vertically integrated factory in the U.S.

Electronics – Adafruit Daily — My signal isn’t THAT noisy, is it?

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !

No Comments

No comments yet.

Sorry, the comment form is closed at this time.

Filed under: open source hardware, RISC-V, Single Board Computers —
Tags: , , — by Anne Barela

Comments Off on The RISC-V Powered BeagleV Board announced #RISCV #OpenSource @beagleboardorg