CircuitPython 6.2.0 Beta 1 Released, with Support for Raspberry Pi RP2040! @adafruit @circuitpython #RP2040 #RaspberryPiPico

This is the second beta release of CircuitPython 6.2.0. This release, 6.2.0-beta.1, contains fixes and improvements, most notably for RP2040, ESP32-S2, and Spresense. See Port status below for details on port stability for each port, and Known issues for known problems. If you find any issues with this release, please file an issue.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in our new Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Port status

CircuitPython has a number of “ports” that are the core implementation for a variety of microcontroller families. Stability varies on a per-port basis. As of this release, atmel-samd, nrf, and stm for the F4 family are stable. cxd56, esp32s2, raspberrypi, and stm for other STM chip families are being actively improved but may be missing functionality and have bugs. litex and mimxrt10xx are in an alpha state and will have bugs and missing functionality.

Changes since 6.2.0-beta.0

Fixes and enhancements

  • Re-enable native adafruit_bus_device, and enable it to support duck typing. #3936. Thanks @gamblor21.
  • EVE graphics library: change integer arguments to floating point, to match OpenGL. #4051. Thanks @jamesbowman.
  • Update protomatter library to support RGBMatrix tiling.. #4068. Thanks @jepler.

Board- and port-specific changes

  • ESP32-S2: Add initial displayio.ParallelBus support. #4047. Thanks @kmatch98.
  • Metro M4 Airlift Lite: Turn on EVE graphics library to support Gameduino 3X Dazzler. #4054. Thanks @dglaude.
  • raspberrypi:
    • Fix DigitalInOut.pull to return correct value. #4052. Thanks @tannewt.
    • Raise NotImplementedError when trying to use UART. #4071. Thanks @tannewt.
    • Add GP15 to available pins. #4063. Thanks @dhalbert.
  • Spresense: Update Spresense SDK and fix USB CDC after TinyUSB update. #4064. Thanks @kamtom48.

Build and infrastructure changes

  • Add CIRCUITPY_* switches for binascii, errno, json, and re. Update documentation about those modules. #4060. Thanks @dhalbert.

Documentation

  • Update Design Guide for CO2 and eCO2 driver parameter names. #4070. Thanks @rpavlik.
  • Translation additions and improvements. Thanks:
    • @bergdahl (Swedish)
    • @hexthat (Chinese Pinyin)
    • @tawez (Polish)

New boards since 6.2.0-beta.0

(none)

Full commit log is here.

Breaking changes since 5.x

  • i2cslave is now i2cperipheral and the class in it is changed as well.
  • The stop kwarg has been removed from I2C.writeto(). If no stop is desired, then use writeto_then_readfrom.
  • The default speed of busio.I2C and board.I2C is now 100khz, not 400khz as before. Use busio.I2C to set the speed explicitly. #3471 Thanks @caternuson, @ladyada, @hierophect and @tannewt.
  • _bleio.ConnectionError has be removed. Code will now raise the native ConnectionError instead.

Known issues

  • ESP32-S2: Crash when repeatedly creating and destroying busio.I2C object on ESP32-S2. #3846.
  • Writing several larger files to CIRCUITPY when there is no serial connection to the board can take a long time or hang. To speed up copying, open a serial (REPL) connection. #3986.
  • See https://github.com/adafruit/circuitpython/issues for other issues.

Thanks

Thank you to all who used, tested, and contributed since 6.2.0-beta.0, including @bergdahl, @dglaude, @dhalbert, @gamblor21, @hexthat, @hierophect, @jamesbowman, @jepler, @kamtom480, @kmatch98, @ladyada, @rpavlik, @tannewt, @tawez, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

Documentation

Documentation is available in readthedocs.io.

This release is based on MicroPython 1.9.4 @25ae98f. Support upstream MicroPython by purchasing a PyBoard (from Adafruit here) or sponsoring MicroPython on GitHub.

Translations

One important feature of CircuitPython is translated control and error messages. With the help of fellow open source project Weblate, we’re making it even easier to add or improve translations. Sign in with an existing account such as Github, Google or Facebook and start contributing through a simple web interface. No forks or pull requests needed!

Troubleshooting

Check out this guide for info on common problems with CircuitPython. If you are still having issues, then post to the Adafruit Support Forums and join Discord.

Assets

Builds are no longer stored as assets on this release page, because there are too many of them. Please see the Download from circuitpython.org section above.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.