We’ve got the New nEw NEW for you right here:
NEW PRODUCTS THIS WEEK
Adafruit Metro M7 with AirLift – Featuring NXP iMX RT1011
Coming soon! Sign up to be notified when these are in stock!
Get ready for our fastest Metro ever – the NXP iMX RT1011 microcontroller powers this board with a 500 MHz ARM Cortex M7 processor. There’s 4 MB of execute-in-place QSPI for firmware + disk storage and 128KB of SRAM in-chip.
Raspberry Pi Compute Module 4 with WiFi – 2GB / No MMC
The Raspberry Pi Compute Module 4 is based on the Raspberry Pi 4 Model B, but in a smaller form factor – perfect for embedding into products or projects without the bulk of a classic Raspberry pi. You get all the computational power of Raspberry Pi 4 in a compact form factor for deeply embedded applications. The CM4 incorporates the same quad-core ARM Cortex-A72 processor, dual video output, gigabit Ethernet, UART, I2C, SPI, I2S and a few PWM for good measure.
Raspberry Pi Compute Module 4 with WiFi – 2GB RAM and 8GB MMC
The Raspberry Pi Compute Module 4 is based on the Raspberry Pi 4 Model B, but in a smaller form factor – perfect for embedding into products or projects without the bulk of classic Raspberry Pi. You get all the computational power of Raspberry Pi 4 in a compact form factor for deeply embedded applications. The CM4 incorporates the same quad-core ARM Cortex-A72 processor, dual video output, gigabit Ethernet, UART, I2C, SPI, I2S, and a few PWM for good measure.
1.25mm Pitch 10-pin Cable 20cm long 1:N Cable – Molex PicoBlade Compatible
When 0.1″ is too big, and JST PH’s too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable – Molex PicoBlade Compatible
When 0.1″ is too big, and JST PH’s too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
This cable is handy and not too long, 20cm in fact. The friction lock makes easy-breezy connections whenever you need light and small connectivity.
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable – Molex PicoBlade Compatible
When 0.1″ is too big, and JST PH’s too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
This cable is handy and not too long, 20cm in fact. The friction lock makes easy-breezy connections whenever you need light and small connectivity.
1.25mm Pitch 7-pin Cable 20cm long 1:N Cable – Molex PicoBlade Compatible
When 0.1″ is too big, and JST PH’s too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
This cable is handy and not too long, 20cm in fact. The friction lock makes easy-breezy connections whenever you need light and small connectivity.
1.25mm Pitch 4-pin Cable 20cm long 1:N Cable – Molex PicoBlade Compatible
When 0.1″ is too big, and JST PH’s too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
This cable is handy and not too long, 20cm in fact. The friction lock makes easy-breezy connections whenever you need light and small connectivity.
1.25mm Pitch 3-pin Cable 20cm long 1:N Cable – Molex PicoBlade Compatible
When 0.1″ is too big, and JST PH’s too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
This cable is handy and not too long, 20cm in fact. The friction lock makes easy-breezy connections whenever you need light and small connectivity.
Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board – STEMMA QT
It’s summer and you’re sweating and your hair’s all frizzy and all you really want to know is why the weatherman said this morning that today’s relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HTU21D-F Temperature + Humidity Sensor – the best way to prove the weatherman wrong!
NeoKey Socket Breakout for Mechanical Key Switches with NeoPixel – For MX Compatible Switches
The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow – and that’s what the Adafruit NeoKey Breakout will let you do! This little 0.75″ x 0.85″ PCB can fit one Cherry MX or compatible switch and make it easy to use with a breadboard or perfboard.
Adafruit Neo Trinkey – SAMD21 USB Key with 4 NeoPixels
It’s half USB Key, half Adafruit Trinket…it’s Neo Trinkey, the circuit board with a Trinket M0 heart and four RGB NeoPixels for customizable glow. We were inspired by some USB key flashlight boards that would turn any battery pack into an LED torch. So we thought, hey what if we made something like that but with fully programmable color NeoPixels? And this is what we came up with!
Visit www.adafruit.com/new for more info.
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter