Case for Raspberry Pi 4 via @ecken #3DPrinting #RaspberryPi

Hey folks! I designed a snap fit case for the Raspberry Pi 4 model B. The VHS inspired theme was an idea by Liz [BlitzCityDIY].

3D printed snap fit case for the Raspberry Pi 4 model B. No screws or supports required. STLs, Fusion 360 source and STEP available on Thingiverse. Enjoy!

Download from Thingiverse
https://www.thingiverse.com/thing:4817060/

Raspberry Pi 4 Model B – 1GB
https://www.adafruit.com/product/4295

Raspberry Pi 4 Model B – 2GB
https://www.adafruit.com/product/4292

Raspberry Pi 4 Model B – 4GB
https://www.adafruit.com/product/4296


Mini 3D printed tape reels press fit onto cover.


Top cover printed with textured PEI flex plate.


micrSD card slot features dedicated recess.


Recessed side for ports. Cutouts test fitted with PLA filaments.


Includes basic top cover with slot for display connector and 2×20 header.




As 2022 starts, let’s take some time to share our goals for CircuitPython in 2022. Just like past years (full summary 2019, 2020, and 2021), we’d like everyone in the CircuitPython community to contribute by posting their thoughts to some public place on the Internet. Here are a few ways to post: a video on YouTub, a post on the CircuitPython forum, a blog post on your site, a series of Tweets, a Gist on GitHub. We want to hear from you. When you post, please add #CircuitPython2022 and email circuitpython2022@adafruit.com to let us know about your post so we can blog it up here.

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 32,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Pololu’s account of the chip shortage

Wearables — Make it sticky

Electronics — Your job’s a joke, you’re broke, your semiconductor is DOA

Python for Microcontrollers — Python on Microcontrollers Newsletter: Raspberry Pi Pico turns one and more! #Python #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — 2021 in Recap!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — NEW PRODUCT – ESP32­-S3­-DevKitC-1 – ESP32-S3-WROOM-2 – 32MB Flash 8MB PSRAM

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. Mill a metal heatsink of concentric rings to replace the tape insert?

Sorry, the comment form is closed at this time.