3D Hangouts – FunHouse, NeoTrinkey and Gearbox

Livestream starts: Wednesday, May 12 2021 @11am ET

This week we’re checking out the FunHouse and printing a yellow brick road themed stand. Prototyping more updates to the NeoTrinkey case and Print-In-Place Gears for Timelapse Tuesday. A few Community Makes to end the show, fabulous!

3D Hangouts – FunHouse, NeoTrinkey and Gearbox
https://youtu.be/l3sG9rMgcAQ

Learn Guide
https://learn.adafruit.com/funhouse-3d-printed-stand/

Layer by Layer – Ideation of a Lemon
https://youtu.be/5ZEGOkDrX_E

Adafruit FunHouse
https://www.adafruit.com/product/4985

Neo Trinkey SAMD21
https://www.adafruit.com/product/4870

USB C cable with Data/Charge Switch
https://www.adafruit.com/product/4696

Timelapse Tuesday:

Gear Box – Filippo Alfieri
https://cults3d.com/en/3d-model/architecture/gear-box-v-2
https://youtu.be/lUibJv5hyzY

Community Makes

https://twitter.com/flaviofdev/status/1390774690923401218 Matrix Display Harness for Kitchen
https://www.thingiverse.com/make:933339 16×16 matrix pixel display




Halloween season is here!
Halloween season is here! Check out all the posts, gift guides, and more!

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 10/30/24 Adafruit LPS28 (LPS28DFW) Pressure Sensor – STEMMA QT / Qwiic

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: MicroPython v1.24.0 is here, a Halloween Wrap-up and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Halloween, WiLo, and more!

Maker Business – Adafruit Daily — First Solar’s $1.1 billion development of vertically integrated factory in the U.S.

Electronics – Adafruit Daily — Trigger happy oscilloscope?

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.