New Products 5/19/2021 Featuring Adafruit Slider Trinkey – USB NeoPixel Slide Potentiometer!

We’ve got the New nEw NEW for you right here:


NEW PRODUCTS THIS WEEK


Witty Pi 3 Mini – RTC & Power Management for Raspberry Pi

Witty Pi 3 Mini adds RTC (DS3231SN) and power management to your Raspberry Pi, and can define complex ON/OFF sequence with simple script.

It’s a small electronic board that can add real-time clock and power management to your Raspberry Pi. Witty Pi 3 Mini is a new member of the third generation of Witty Pi, and it has bonnet/pHAT form factor.

Read more


Black Woven Right Angle USB C to USB A Cable – 0.2m long

As technology changes and adapts, so does Adafruit, and speaking of adapting, check this Right Angle Black Woven USB-C to USB-A Cable.

USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation.

Read more


HDMI to USB-C Video Capture Adapter

Here’s one of the easiest capture solutions for getting HDMI data into any system with a USB-C port.

Use this capture device to convert a video signal from a camera (or another device) into a digital format your computer can recognize. It’s trivially easy to use: connect one end to an HDMI output up to 1080p. Connect the other end to a USB-C port.

Read more


Adafruit FunHouse Mounting Plate and Yellow Brick Stand

Here is the perfect kit for your FunHouse, with a wall-mounting plate that can be attached onto the back of the ‘House. This kit also includes a set of yellow bricks for customizing how you prop up your FunHouse. And of course, the mounting hardware is included, so you can assemble it with just a plain screwdriver. Takes less than 3 minutes!

Read more


Dual Edge Side-Light NeoPixel LED Strip with120 LEDs per meter – 1 meter long

Fancy new dual-sided NeoPixel strips are a great alternative for folks who have loved and used Adafruit LED strips for a few years but want gorgeous, glowy light from both sides! These are called “120 LED per meter” because they have the same density as 60 LED per meter strips, and then of course, two LEDs on either side. Both top and bottom LED in each segment will always display the same color. You can run them along a thin edge and curve them around shapes and corners. These look awesome for accent lighting, backlighting, edge lighting, etc!

Read more


Relegendable Plastic Keycaps for MX Compatible Switches – 5 pack

Get ready to customize your keeb with a 5 pack of two-part plastic keycaps for your next mechanical keyboard or NeoKey project.

Each keycap comes with a off-white base and a clear cover piece. You can easily remove the clear cover to put a sticker or slip of paper underneath to make a custom keycap label. Snap ’em onto any Cherry MX or compatible switch

Read more


Cherry MX Mechanical 4-Key Tester: Blue Black Red Brown Switches

For crafting your very own custom keyboard, these Cherry MX mechanical key switches are deeee-luxe! This tester gives you one of each, mounted onto a nice plastic cut-out, so you can quickly try all 4. Clicky? Tactile? Linear? What do those terms really mean…you’ll know instantly when you poke each key.

Read more


Adafruit BME688 – Temperature, Humidity, Pressure and Gas Sensor – STEMMA QT

The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price!

Read more


Adafruit Slider Trinkey – USB NeoPixel Slide Potentiometer

It’s half USB Key, half Adafruit Trinket, half mini slide pot… it’s Slider Trinkey, the circuit board with a Trinket M0 heart, NeoPixel glow, and a 35mm long 10KΩ slide potentiometer.

The PCB is designed to slip into any USB A port on a computer or laptop. There’s an ATSAMD21 microcontroller on board with just enough circuitry to keep it happy. One pin of the microcontroller connects to the middle of the slide potentiometer as an analog input. Another connects to two NeoPixel LEDs. The third pin can be used as a capacitive touch input. A reset button lets you enter bootloader mode if necessary. That’s it!

Read more


Visit www.adafruit.com/new for more info.

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.