New Products 06/09/21 feat. #Adafruit #Trinkey #QT2040 – RP2040 USB Key with Stemma QT!

Screen Shot 2018 05 04 at 7 44 26 AM

We’ve got the New nEw NEW for you right here:


NEW PRODUCTS THIS WEEK


4966 02

Gridded Sticky Notepad – 80 Sheets – 3″ / 75mm Square

For the times when you need to jot down a few thoughts or diagrams but don’t necessarily need a whole honkin’ spiral notebook, here’s a handy palm-sized White Grid Sticky Notepad with 80 sheets per pad. Each sticky note is 75mm x 75mm (3″ x 3″)

Read more


4995 04

Silicone RJ-45 Dust Cover Inserts – 10 Pack

Here’s an easy solution for keeping your Ethernet ports free from dust and other unsavory particulates. These squishy Silicone RJ-45 Dust Cover Inserts slip neatly into any computer or device with an Ethernet socket, from the Ethernet FeatherWing to the Raspberry Pi 4.

Read more


3470 00

Assembled Music Maker FeatherWing w/ Stereo 3W Amplifier – MP3 OGG WAV MIDI Synth Player

Bend all audio files to your will with the Adafruit Music Maker FeatherWing + Amplifier! It’s a fun-size version of our Music Maker shield for Arduino, and similar to our other Music Maker FeatherWing, but this one is even better – with an on-board 3 Watt amplifier! This powerful wing features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally.

Read more


4196 07

Adafruit 1.54″ Monochrome eInk / ePaper Display with SRAM – 200×200 with SSD1681

Easy e-paper finally comes to microcontrollers, with this breakout that’s designed to make it a breeze to add a eInk display. Chances are you’ve seen one of those new-fangled ‘e-readers’ like the Kindle or Nook. They have gigantic electronic paper ‘static’ displays – that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!

Read more


4197 07

Adafruit 2.13″ Monochrome eInk / ePaper Display with SRAM – 250×122 Monochrome with SSD1680

Easy e-paper finally comes to microcontrollers, with this breakout that’s designed to make it a breeze to add a monochromatic eInk display. Chances are you’ve seen one of those new-fangled ‘e-readers’ like the Kindle or Nook. They have gigantic electronic paper ‘static’ displays – that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!

Read more


4997 00

Black DSA Keycaps for MX Compatible Switches – 10 pack

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of Adafruit black DSA keycaps for your next mechanical keyboard or NeoKey project. Snap ’em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil’est macro keypad.

Read more

See all the key caps here: https://www.adafruit.com/category/357…


5092 00

CircuitPython Space Explorers Sticker

Snaaaaaaaaaaaakes in Spaaaaaaaaaaaaaaaace! This holographic sticker features Blinka as a SpaceSnake, ready to launch in her CircuitPython-powered ship. Perfect for laptops, mini-sats or the workbench. If you can’t get enough of this friendly python, Blinka is also available as an enamel pin and as a temporary tattoo.

Read more


5056 03

Adafruit Trinkey QT2040 – RP2040 USB Key with Stemma QT

It’s half USB Key, half Adafruit QT Py, and a lotta RP2040…it’s Trinkey QT2040, the circuit board with an RP2040 heart and Stemma QT legs. Folks are loving the QT Py 2040 we made, but maybe you want something plug-and-play. So we thought, hey what if we made something like that plugs right into your computer’s USB port? And this is what we came up with!

Read more


New Products 06/09/21 feat. Adafruit Trinkey QT2040 – RP2040 USB Key with Stemma QT!

Visit www.adafruit.com/new for more info.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.