New Products 06/30/21 feat. Gray Anodized Aluminum Bumper Feet – Pack of 2!

Adafruit new products hero e1617299615525

Browse through all that’s new here!


4279 04 1

Adafruit Ultimate GPS with USB – 66 channel w/10 Hz updates

The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With the built in USB-to-Serial converter, you can now plug-n-play the Ultimate GPS into your computer, laptop, embedded Linux computer, and more. Power and transport data over any micro USB cable, with handy on-board indicator LEDs that let you know fix status and whether data is being received & transmitted.

Learn more!

2324 07
Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2/3/Pi 4 – Mini Kit

It’s 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model Pi 3, Pi Zero, A+, B+, or Pi 2, 3, & 4

Learn more!

5031 02

Woven USB Cable with USB Type A to Right Angle USB Type C – Black 1 meter long

Some days we’re feeling extra fancy here at the ‘fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable. Our latest addition to the collection is this 1 meter long Adafruit Black Woven USB Cable with USB Type A to Right Angle USB Type C.

USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation, so this right angle connector can curve to the left or the right.

Works great with any USB 1 or 2.0 device or cable that has a USB C port.

Learn more!

5112 00
Black Windowed Lamp R4 Keycap for MX Compatible Switches

These stark and elegant Black Windowed Lamp R4 Keycaps are made of opaque black plastic with a small cutout in the south-center edge that wraps around the top and bottom. The cut-out has a clear plastic window to allow an LED installed under the switch to glow through. These are somewhat rare to find, but they have a little bit of the je ne sais quoi to your keeb or macropad build

Learn more!

5035 00
Lithium Ion Polymer Battery – 3.7V 10050mAh (10 Ah)

Lithium ion polymer (also known as ‘lipo’ or ‘lipoly’) batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 10,050mAh (a.k.a 10 Ah) for a total of about 37 Wh.

Learn more!

5064 00
SHT30 Temperature And Humidity Sensor – Wired Enclosed Shell

The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.

Learn more!

5062 00
Mini Panel Mount USB Trackpad with Two Buttons

Add a cool touch interface with your project with this Panel Mount USB Trackpad with Two Buttons that is super easy to use and interface with. Simply plug it into your computer (desktop of single-board-linux type), it will appear as an external HID trackpad with left and right buttons.

Perfect for use with an embedded computer setup that needs a pointer but you don’t have a touchscreen, and not enough space for a mouse.

Learn more!

5063 00
Mini Panel Mount USB Trackball with Three Buttons

Add a rolling interface with your project with this Panel Mount USB Trackball with Three Buttons that is super easy to use and interface with. Simply plug it into your computer (desktop of single-board-linux type), it will appear as an external mouse with left and right buttons plus a middle button.

Learn more!

5142 04
SparkFun Qwiic pHAT v2.0 for Raspberry Pi – STEMMA QT / Qwiic

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic or STEMMA QT ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic/QT connectors on the HAT. Since this system allows for daisy-chaining boards with different addresses, you can plug in as many sensors as you’d like!

Learn more!

5054 03

Blue Anodized Aluminum Bumper Feet – Pack of 2

Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They’re so cool looking we figure they could be your new favorite accessory.

Use the included M4-threaded machine screws to bolt onto the bottom of any electronic kit or device and add a look of cool Neo-Tokyo or Night City fashion. You could also skip the screw and use a double-sided foam or tape to stick it on.

Comes in a pack of 2 feet pieces. One bumper is approx 22mm in diameter and 11mm tall.

Learn more! Also available in Silver, Green, Purple, Red, Black, and Gray!

Stay in the loop at!

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here:

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here:

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in!

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community!

CircuitPython – The easiest way to program microcontrollers –

Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at !

No Comments

No comments yet.

Sorry, the comment form is closed at this time.