An STM32/ESP32/ESP8285-based radio link for RC applications #ESP32 #Radio #RC

ExpressLRS is an STM32/ESP32/ESP8285-based High-Performance Radio Link for RC applications

It is based on the fantastic semtech SX127x/SX1280 hardware combined with an ESP8285ESP32 or STM32. ExpressLRS supports a wide range of hardware platforms as well as both 900 MHz and 2.4 GHz frequency options. ExpressLRS uses LoRa modulation as well as reduced packet size to achieve best in class range and latency compared to current commercial offerings.

ExpressLRS can run at various packet rates, up to 500hz or down to 25hz depending on your preference of range or low latency. At 900 MHz a maximum of 200 Hz packet rate is supported. At 2.4 GHz a blistering 500 Hz is currently supported with a custom openTX binary with future plans to extend this to 1000 Hz.

ExpressLRS supports telemetry as optional feature. Enabling telemetry also adds support for the betaflight lua script.

See their GitHub page for details


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 30,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Supply delays have made their way inland with railway bottlenecks

Wearables — Light up the outside

Electronics — Current limiting!

Python for Microcontrollers — Python on Microcontrollers Newsletter: 9K Subscribers, Cheat Sheets and More! #Python #Adafruit #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — WFH Stress Monitor, Helping Parkinson's Patients with IoT, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 9/15/21 feat. Adafruit LED Glasses Front Panel – 116 RGB LEDs w/ I2C Driver -STEMMA QT! @adafruit #adafruit #newproducts

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.