NEW PRODUCT – Raspberry Pi PoE+ HAT

5058 iso demo ORIG 2021 08

NEW PRODUCT – Raspberry Pi PoE+ HAT


Power over Ethernet (PoE) can make your project wiring a breeze – instead of needing a wire for power and data, you can use one Ethernet cable for both!

5058 top demo ORIG 2021 08

5058 top ORIG 2021 08

5058 iso ORIG 2021 08

Simply attach the standoffs in the four corners of the HAT, then connect to the 40-pin header. Once the HAT is connected, you can power your Pi through the RJ-45 network connector.

Compatible with Raspberry Pi 3 B+ that has PoE pins and Raspberry Pi 4. The Raspberry Pi computer is not included.

5058 kit ORIG 2021 08

For people with neither Pi 3 B+’s nor Pi 4s, or if you can’t use a HAT in your setup, check out our PoE to MicroUSB splitter, which will work with any computer that is powered from Micro USB.

  • Standard: IEEE 802.3at-2003 PoE
  • Input voltage: 37–57 V DC, Class 4 device
  • Output power: 5VDC / 4A
  • Cooling: real cute 25mm × 25mm brushless fan delivering 2.2 CFM for processor cooling
  • Fully isolated switched-mode power supply and fan control
  • Operating temperature: 0°C ~ +50°C

We also still carry the V1 version of the PoE HAT.

5058 quarter ORIG 2021 08

In stock and shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 11/15/2024 Featuring Adafruit bq25185 USB / DC / Solar Charger with 3.3V Buck Board! (Video)

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython 9.2.1, What is DMA, PyConUS 2025 and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Halloween, WiLo, and more!

Maker Business – Adafruit Daily — Checking in on Intel

Electronics – Adafruit Daily — Probe Compensation

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.