New Products 8/11/21 feat. Adafruit SCD-41 – NDIR CO2 Temperature and Humidity Sensor – STEMMA QT / Qwiic!

We’ve got the New nEw NEW for you right here:


NEW PRODUCTS THIS WEEK


Clear Kailh CHOC Slim Key Caps x 10 pack

Dress up your svelte CHOC mechanical keys with these elegant crystaline keycaps. These are thin and flat so they’re great for slim Kailh ‘Chocolate’ key switches.

Read more


Black Kailh CHOC Slim Key Caps x 10 pack

Dress up your svelte CHOC mechanical keys with these elegant Adafruit Black keycaps. These are thin and flat so they’re great for slim Kailh ‘Chocolate’ key switches.

Read more


Four Key Silver Aluminum Keypad Shell Enclosure – MX Compatible Switches

For all the DIY keebfans in the house here is a super sleek and sturdy 4-Key Aluminum Keypad Shell in Silver, the perfect base to begin your custom keypad project. You provide the PCB in the housing and bolt it into this base. Makes for a prettier build with more protection than just layers of PCB or acrylic. While it’s designed for a custom PCB, you could also just snap in 4 keys and ‘free wire’ them. Comes with one anodized silver aluminum enclosure and a clear acrylic bottom that screws on with two M2 bolts.

Read more


Two Key Black Aluminum Keypad Shell Enclosure – MX Compatible Switches

For all the DIY keebfans in the house here is a super sleek and sturdy 2-Key Aluminum Keypad Shell in Black, the perfect base to begin your custom keypad project. You provide the PCB in the housing and bolt it into this base. Makes for a prettier build with more protection than just layers of PCB or acrylic. While it’s designed for a custom PCB, you could also just snap in 2 keys and ‘free wire’ them. Comes with one anodized black aluminum enclosure and a clear acrylic bottom that screws on with one bolt.

Read more


4×4 Key Deluxe Aluminum Keypad Shell Enclosure

For all the DIY keebfans in the house here is a very fancy and sturdy 4×4 Keypad Shell in Dark Gray with silver accents, the perfect base to begin your custom keypad project. You provide the PCB in the 4×4 housing and bolt it into this base. This multi-part enclosure is super luxe, with milled and anodized solid aluminum and a hinge that will let you angle the box.

Read more


Adafruit SCD-40 – True CO2, Temperature and Humidity Sensor – STEMMA QT / Qwiic

Take a deep breath in…now slowly breathe out. Mmm isn’t it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from and then breathes out carbon dioxide. CO2 is essential for life on this planet we call Earth – we and plants take turns using and emitting CO2 in an elegant symbiosis. But it’s important to keep that CO2 balanced – you don’t want too much around, not good for humans and not good for our planet.

Read more


Adafruit SCD-41 – NDIR CO2 Temperature and Humidity Sensor – STEMMA QT / Qwiic

The SCD-41 is a photoacoustic ‘true’ CO2 sensor that will tell you the CO2 PPM (parts-per-million) composition of ambient air. Unlike the SGP30, this sensor isn’t approximating it from VOC gas concentration – it really is measuring the CO2 concentration! That means it’s bigger and more expensive, but it is the real thing. Perfect for environmental sensing, scientific experiments, air quality and ventilation studies, and more.

Read more


Visit www.adafruit.com/new for more info.

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.