NEW PRODUCT – ESP32-S2 Human Machine Interface Dev Kit 1 – ESP32-S2-HMI-DevKit-1

5207 kit ORIG 2021 08

NEW PRODUCT – ESP32-S2 Human Machine Interface Dev Kit 1 – ESP32-S2-HMI-DevKit-1


Espressif’s ESP32-S2 Human Machine Interface Dev Kit 1 (ESP32-S2-HMI-DevKit-1) has been specifically designed for human-machine interfaces in smart-home automation controllers, smart speakers with display, smart alarm clocks, etc.

ESP32-S2-HMI-DevKit-1 is powered by the ESP32-S2-WROVER module, which supports a 4.3″ LCD screen. The development board can have an optional 1,950mAh rechargeable lithium battery installed. There’s lots of peripheral interfaces such as an extra USB serial programming/UART port, SPI, TWAI, I2C, and an SD card. It supports various sensors and functions such as audio playback and recording. Additionally, this development kit supports rapid secondary development, allowing developers to take advantage of the kit’s various onboard resources and expansion interfaces.

Please note this is an advanced development kit, for use with the ‘raw’ Espressif ESP IDF. For example, there isn’t CircuitPython or Arduino support for the display at this time. We’re stocking this because we think it’s a great dev board if you want to implement support for this hardware or play with display interfaces and the ESP32-S2

5207 iso ORIG 2021 08

5207 side 01 ORIG 2021 08

5207 side 02 ORIG 2021 08

5207 side 03 ORIG 2021 08

ESP32-S2-HMI-DevKit-1 Specifications:

  • Wireless microcontroller module: ESP32-S2-WROVER module with ESP32-S2 Xtensa single-core 32-bit LX7 microprocessor, up to 240 MHz with 128 KB ROM, 320 KB SRAM, WiFi 4 connectivity, 4MB flash, 2MB PSRAM
  • Storage: MicroSD card slot
  • Display: 4.3″ display with 800×480 resolution connected with 16-bit interface plus I2C capacitive touch panel overlay
  • Display interface: 16-bit, 20 MHz, 8080 parallel communication
  • Audio: Audio amplifier, built-in microphone, speaker connector
  • USB: 1x USB-C OTG (DFU/CDC) port, 1x USB-C debug port
  • Expansion: SPI header, TWAI (2-wire automotive interface)/CAN header, I2C header, UART/Prog header
  • Sensors: 3-axis accelerometer, 3-axis gyroscope, ambient light sensor, temperature and humidity sensors
  • Miscellaneous: Programmable RGB LEDs, wakeup and reset buttons, IR transmitter
  • Power Supply: 5V and 3.3V power headers
  • Optional Rechargeable Battery: 1,950 mAh Li-ion battery cutout and connector

5207 top disassembled ORIG 2021 08

5207 back 02 ORIG 2021 08

Please note, Espressif is not shipping this product with a battery installed. An off-the-shelf iPhone 5-compatible battery can be purchased and installed by the end user.

5207 quarter ORIG 2021 08

In stock and shipping now!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 30,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Pololu’s account of the chip shortage

Wearables — Getting overly ambitious with EL wire

Electronics — Invisible Bugs

Python for Microcontrollers — Python on Microcontrollers Newsletter: MicroPython SAMD Support, ESP32-S3 Feather and much more! #Python #Adafruit #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — Energy Harvesting Sensor Nodes, Tracking a Turtle, , and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — NEW PRODUCT – Standard Size Ultra High Torque Servo – TowerPro MG959

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.