This is CircuitPython 7.0.0, the latest major revision of CircuitPython, and is a new stable release.
Notable additions to 7.0.0 since 6.3.0
- Support for the CircuitPython development workflow over BLE.
- Camera support on ESP32S2.
qrio
: QR code decoding.- The
keypad
key-scanning module. - Run-time customization of USB devices.
- Merging in of MicroPython fixes and enhancements as of MicroPython 1.16.
_pixelbuf
is nowadafruit_pixelbuf
.colorwheel()
routine moved torainbowio
.supervisor.ticks_ms()
to allow easier time-keeping.- Simplifications to the RGB status LED codes.
- A clocking fix for a few samples of RP2040 boards.
- Rework of
vectorio
and some of its API.VectorShape
is no longer needed for user code. atexit
module.getpass
module.traceback
module.supervisor.get_previous_traceback()
.board.LED
now consistently present on all boards that have such an LED.PulseOut
no longer needs aPWMOut
.- Unicode filename support.
- Board ID is now in
boot_out.txt
and available asboard.board_id
. aesio
on for full builds by default.
Download from circuitpython.org
Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.
Installation
To install follow the instructions in our new Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.
Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).
Documentation
Documentation is available in readthedocs.io.
Port status
CircuitPython has a number of “ports” that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, atmel-samd
, cxd56
(Spresense), esp32s2
, nrf
,raspberrypi
, stm
for the F4 family are stable. stm
for other STM chip families is being actively improved but may be missing functionality and have bugs. litex
and mimxrt10xx
are in an alpha state and will have bugs and missing functionality.
Changes since 7.0.0-rc.3
This release is a relabeling of 7.0.0-rc.3 and is otherwise the same as that release.
Breaking changes and deprecations since 6.x
- The RGB status LED codes have changed for clarity and to save power.
PWMOut
is now only inpwmio
, and is no longer in bothpulseio
andpwomio
.colorwheel()
has been moved from_pixelbuf
torainbowio
.displayio.Group
no longer has amax_size
parameter.vectorio
:Rectangle
,Circle
, andPolygon
are added directly to aGroup
;VectorShape
is not needed.- Using a
PWMOut
forPulseOut
is deprecated and will be removed in 8.0.0. gamepad
is removed: usekeypad
.gamepadshift
is still present but will be removed in 8.0.0.settings.py
andsettings.txt
are no longer alternative names forboot.py
.- The default for
displayio.Display.refresh(..., minimimum_frames_per_second, ...)
is now 0. displayio.Display()
argumentset_vertical_scroll
argument is deprecated and will be removed in 8.0.0.displayio.ParallelBus
is now available asparallelbus.ParallelBus
and will be removed fromdisplayio
in 8.0.0.busio.OneWire
/bitbangio.OneWire
is now available asonewireio.OneWire
and will be removed frombusio
andbitbangio
in 8.0.0.
New boards since 6.3.0
- ARAMCON2 Badge. #4627. Thanks @aramcon-badge.
- ATMegaZero ESP32-S2. #4634. Thanks @eddieespinal.
- Adafruit LED Glasses nRF52840 Driver. #5224, #5265, #5326. Thanks @dhalbert and @ladyada.
- Adafruit MacroPad RP2040. #4770, #4864. Thanks @ladyada.
- AiThinker ESP-12K NodeMCU. #5149. Thanks @codetyphon.
- Arduino Nano RP2040 Connect. #4802. Thanks @BlitzCityDIY.
- BlueMicro840. #5114. Thanks @jpconstantineau.
- CP Sapling Rev B. #4677. Thanks @skerr92.
- Challenger RP2040 WiFi. #5323. Thanks @PontusO.
- CrumpSpace CrumpS2. #5143. Thanks @tylercrumpton.
- Cytron Maker Pi RP2040. #4824. Thanks @CytronTechnologies.
- EncoderPad RP2040. #5247 Thanks @jpconstantineau.
- Espressif HMI DevKit 1. Thanks @jepler.
- Espressif HMI Development Kit. #5335. Thanks @skieast.
- Espressif Kalgua v1.3. #4870. Thanks @jepler.
- Gravitech Cucumber M. #5097. Thanks @anecdata.
- Gravitech Cucumber MS. #5097. Thanks @anecdata.
- Gravitech Cucumber R. #5097. Thanks @anecdata.
- Gravitech Cucumber RS. #5097. Thanks @anecdata.
- Lolin Mini S2. #5239, #5297. Thanks @durapensa.
- micro:bit V2 (first BLE-only board). #5002. Thanks @tannewt.
- Morpheans MorphESP-240. #5129. Thanks @skieast.
- Muselab nanoESP32-S2 WROVER. #4834. Thanks @reppad.
- Oak Development Technologies PixelWing ESP32-S2. #5156. Thanks @skerr92.
- Pimoroni Interstate 75. #5099. Thanks @ZodiusInfuser.
- Pimoroni PGA2040. #4865. Thanks @ZodiusInfuser.
- Pimoroni Plasma 2040. #5099. Thanks @ZodiusInfuser.
- RayTac MDBT50Q-RX nRF52840 dongle. #5095. Thanks @dhalbert.
- senseBox MCU. #4576. Thanks @felixerdy.
- SparkFun MicroMod SAMD51. #4852. Thanks @stonehippo.
- SparkFun MicroMod STM32. #5060. Thanks @cdwilson.
- UnexpectedMaker Feather S2 Neo. #5294. Thanks @UnexpectedMaker.
- WarmBit BluePixel nRF52840. #5229 Thanks @warmbit.
Known issues
- We are not aware of any show-stopper issues.
- See https://github.com/adafruit/circuitpython/issues for other issues.
Thanks
Thank you to all who used, tested, and contributed since 6.3.0. See the 7.0.0 alpha, beta and RC releases for all who contributed. Join us on the Discord chat to collaborate.
This release is based on MicroPython 1.16. Support upstream MicroPython by purchasing a PyBoard (from Adafruit here) or sponsoring MicroPython on GitHub.