New Guide! 3D Printed Frames for LED Glasses #3DPrinting

New Guide! 3D Printed Frames for LED Glasses

3D print a frame for Adafruit LED Glasses IS31FL3741. Use any Adafruit Feather compatible board to control the LED Glasses. The Feather is secured to the arm with M2.5 x 6mm screws and hex nuts. The two arms are secured to the frame with M2.5 x 14mm long machine screws and hex nuts. The frame is secured to the LED glasses PCB with M3 x 6mm long screws and hex nuts. The Feather connects to the LED glasses using a 50mm STEMMA QT cable.

Learn Guide
https://learn.adafruit.com/3d-printed-frame-for-led-glasses-is31fl3741

Adafruit LED Glasses IS31FL3741
https://www.adafruit.com/product/5210

50mm STEMMA QT Cable
https://www.adafruit.com/product/4399

Feather RP2040
https://www.adafruit.com/product/4884

M3 Hardware Kit
https://www.adafruit.com/product/4685

M2.5 Hardware Kit
https://www.adafruit.com/product/3299

USB-C cable
https://www.adafruit.com/product/4696







Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 35,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Chip inventories rise as demand falls

Wearables — How to attach a battery to your next wearables project

Electronics — Check out this shorthand shortcut

Python for Microcontrollers — Python on Microcontrollers Newsletter: 400 CircuitPython Libraries, 3m Thanks and much more! #CircuitPython #Python @ThePSF @micropython @Raspberry_Pi

Adafruit IoT Monthly — 2022 in Recap!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 1/25/2023 Featuring Adafruit ESP32-S2 Reverse TFT Feather! (Video)

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.