Scientists develop a COVID-19 testing lab in a $51 backpack #COVID

In a new study, published in PLOS ONE, scientists from Queen Mary University of London show that their lab-in-a-backpack approach is as effective as commercially available Covid-19 tests at detecting SARS-CoV-2.

The compact kit is relatively inexpensive to make, costing $51 in total. It could offer an alternative testing solution for resource-poor countries or remote areas with little access to well-equipped testing labs or trained personnel to process samples.

The testing kit is based on a simple, non-invasive Covid-19 LAMP test and uses low-cost hardware, including a centrifuge made from recycled computer hard drives to process samples.

The LAMP test is a widely accepted alternative to the commonly used PCR test, has a similar sensitivity but unlike the PCR test does not require temperature cycling, only a single high temperature to amplify any potential virus RNA. This allows the test to be performed with only minimal equipment and reagents. Because the LAMP test uses saliva samples, it also avoids the need for invasive, uncomfortable nasal swabs. However, the high costs of commercially available LAMP tests, as well as the expensive lab equipment required to run them, means that current commercial approaches aren’t suitable for remote locations, or in-home testing.

According to the researchers, next steps will include making the kit instructions even more understandable so that people can use them regardless of their experience or language, as well as validating the kit with real patient samples. Professor Stoyan Smoukov, Professor of Chemical Engineering at Queen Mary University of London, said:

“We are excited for the potential of this mobile lab to do Covid-19 tests and the possibility to democratize access to inexpensive testing technology. It is made possible by our philosophy of creating low-cost instruments whenever possible from advances in electronics, or existing instruments.

“Reuse is a high value option for energy and materials sustainability, and we are glad that rather than exporting electronics waste to developing countries, we can export ways to empower people and turn waste computer hard drives into a centrifuge. The Covid-19 test is a timely application, but we also believe with this CentriDrive kit people could perform a large array of routine blood and urine tests, providing a centrifuge away from central hospital facilities.”

Read more in Science Daily and the research paper.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.