NEW PRODUCT – USB micro B JIG Dummy Plug

5356 iso ORIG 2022 01

NEW PRODUCT – USB micro B JIG Dummy Plug


This USB micro B “JIG” Dummy Plug is a small, handy device for those interested in debugging their smartphones or other devices that use the ID pin #4 for a special signal. This plug has a 300K resistor from the ID pin to ground, which can be used to resuscitate Samsung S4, S5, S6, and possibly others by putting into an emergency repair mode.

It’s also useful for other devices where you may have to trick it into OTG modes. The other pins are not connected to, just the ID and Ground pins!

5356 top ORIG 2022 01

5356 detail ORIG 2022 01

5356 quarter ORIG 2022 01

In stock and shipping now!


Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Chip inventories rise as demand falls

Wearables — Go insane with a membrane (button or keypad)

Electronics — Shift away from basic arithmetic

Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 8.0 RC 1 Out, Board Guides, and Much More! #CircuitPython #Python @ThePSF @micropython @Raspberry_Pi

Adafruit IoT Monthly — Cat Doorbell, Deep Algae Bloom Detector, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 02/01/23 Featuring Adafruit Floppy FeatherWing with 34-Pin IDC Connector!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.