3D Hangouts This Week with @videopixil @ecken

Livestream starts Wednesday, February 23 at 11am ET

Hey folks, we’re doing this thing today. We’ll be taking a look at some 3d printed sleeves for floppy drives and we have a neat project for the prototyping segment.

This week @adafruit we’re 3D printing cases for floppy drives. Prototyping an etch-a-sketch inspired drawing handheld using 2.4in TFT FeatherWing and CircuitPython. The timelapse this week is a print-in-place articulated fish printed in MatterHackers Quantum PLA filament. Radical!

Floppy Case Learn Guide
https://learn.adafruit.com/floppy-case

2.4in TFT FeatherWing
https://www.adafruit.com/product/3315

Feather M4
https://www.adafruit.com/product/3857

Quantum Filament Matterhackers –
https://www.matterhackers.com/store/c/matterhackers-quantum-pla

Timelapse Tuesday

Flexi Fish – DESIGNS 17
https://cults3d.com/en/3d-model/game/flexi-poisson
https://youtu.be/h3zlj3oL03Q

Community Makes
https://www.thingiverse.com/make:1015122 tusken staff
https://www.prusaprinters.org/prints/7152-3d-printed-unicorn-horn/ unicorn horn
https://www.thingiverse.com/thing:5252236 pybade thermal cam
https://www.thingiverse.com/make:1014044 gunblade
https://www.prusaprinters.org/prints/7291-circuit-playground-express-snap-fit-mount/ cpx mount
https://www.thingiverse.com/make:1013219 loki stick
https://www.thingiverse.com/thing:5250217 clue PyLoton case

 


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 32,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — A development to watch: Intel in Ohio

Wearables — Seal the dEaL with this project tip

Electronics — Breadboarding Wire

Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 7.3.0 RC0 Out and Much More! #Python #CircuitPython @micropython @ThePSF

Adafruit IoT Monthly — Detecting Water Pollution, Smart Girder, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 5/18/2022 Feat. Adafruit NAU7802 24-Bit ADC – STEMMA QT / Qwiic!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.