ICYMI – Adafruit IoT Monthly Newsletter: Mailbox Bot, Wireless MIDI, and more!

IoT Projects

ICYMI (In case you missed it) – the IoT Monthly Newsletter from AdafruitDaily.com went out this morning!

If you missed it, subscribe now! – You’ll get one newsletter each month.

The next newsletter goes out in a month and being subscribed is the best way to keep up with all the Internet of Things. No spam, no selling lists, leave any time. Over 4,000+ subscribers worldwide!

ML Weather Station Predicts Future Air Quality

A DIY weather station that uses machine learning to predict future air quality readings. – HackADay

WeatherBot – 3D Printable Weather Forecasting Theater

An internet-connected weather machine that displays the current forecast using a miniature diorama. – HackADay

Home Applications Prototype

Bakken & Bæck developed a “technical prototype for a collection of apps which would allow you to teach your old furniture some new tricks, which you could then control to suit your own personal needs at your leisure.” – everydayexperiments

Off-Grid Raspberry Pi Pocket Cloud Server

A Raspberry Pi Zero W is turned into a portable off-grid NAS storage solution. – instructables

Wireless MIDI with nRF24L01

A hack to send MIDI data over nRF24L01 radio modules. This may be useful for artists who are limited by physical MIDI cables in their performances. – hackaday

Off-grid LoRa Communicator

“I started this project because I often travel in convoy with friends to remote areas where sending a simple WhatsApp message is impossible due to non-existent cell phone signal.” – hackaday

TshWatch, ESP32 Watch

An ESP32 e-ink watch with a real-time clock, skin temperature monitoring, pedometer, air humidity, and pressure sensors. – hackster

Solar-powered MailboxBot

An internet-connected camera takes daily pictures of the inside of fhuable’s mailbox and uploads them to an FTP server. – fhu-space

IoT News and More!

WiFiWire – a I2C to UDP Bridge

WiFiWire provides a Wire (i2c) protocol able to communicate over AsyncUDP. You can have your program use a Wire (i2c) sensor/device, but it is communicating over a network rather than wiring. – Adafruit Blog

Cloning the AirTag

An experiment to develop an AirTag-clone. – positive.security

Adafruit.io, the IoT Platform for Everyone

Sign up for our IoT Platform, Adafruit IO (for free!) by clicking this link. We don’t have investors and we’re not going to sell your data. When you sign up for Adafruit IO+, you’re supporting the same Adafruit Industries whose hardware and software you already know and love! You help make sure we’re not going anywhere by letting us know we’re on the right track.

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org

Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !

No Comments

No comments yet.

Sorry, the comment form is closed at this time.