Howdy folks, we’re doing this thing today. Hope to see you in the discord chat!
Livestream starts Wednesday, March 2nd 2022 at 11:00am ET
This week @adafruit we’re making a sketch drawing device with CircuitPython. Prototyping zipper pulls using glow-in-the-dark powder. The timelapse this week is a ramp walking robot printed in MatterHackers Quantum PLA filament. Mechanical!
YouTube Project Video
https://youtu.be/0M7IT2ROX84
Learn Guide
https://learn.adafruit.com/sketch-drawing-toy/
Code on Github
https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/CircuitPython_Knob_Sketcher/feather_sketcher/code.py
2.4in TFT FeatherWing
https://www.adafruit.com/product/3315
Feather M4
https://www.adafruit.com/product/3857
16mm momentary push button
https://www.adafruit.com/product/1503
Mini Toggle switch
https://www.adafruit.com/product/3221
2x 10k Potentiometers Linear
https://www.adafruit.com/product/562
1200mAh battery
https://www.adafruit.com/product/258
Short Headers for Feather
https://www.adafruit.com/product/3002
30AWG silicone wire
https://www.adafruit.com/product/2051
Headers Right-Angled
https://www.adafruit.com/product/1540
M2.5 Hardware Kit
https://www.adafruit.com/product/3299
Timelapse Tuesday
Ramp Walking Toy – NemoMK2
https://cults3d.com/en/3d-model/gadget/walking-nemo-mk2
Walking toys: https://www.youtube.com/watch?v=EwMGOo-xkAk
Community Makes
https://www.prusaprinters.org/prints/7276-pygamer-snap-fit-case/comments#preview-comment pygamer case
https://www.thingiverse.com/make:1016974 zelda sword
https://www.prusaprinters.org/prints/30359-thermal-imaging-camera/comments#comment-173601
https://www.thingiverse.com/thing:5261639 big key switch