3D Hangouts – Sketch Toy, Zipper Pulls and Walking Robots

This week @adafruit we’re making a sketch drawing device with CircuitPython. Prototyping zipper pulls using glow-in-the-dark powder. The timelapse this week is a ramp walking robot printed in MatterHackers Quantum PLA filament. Mechanical!

YouTube Project Video
https://youtu.be/0M7IT2ROX84

Learn Guide
https://learn.adafruit.com/sketch-drawing-toy/

Code on Github
https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/CircuitPython_Knob_Sketcher/feather_sketcher/code.py

2.4in TFT FeatherWing
https://www.adafruit.com/product/3315

Feather M4
https://www.adafruit.com/product/3857

16mm momentary push button
https://www.adafruit.com/product/1503

Mini Toggle switch
https://www.adafruit.com/product/3221

2x 10k Potentiometers Linear
https://www.adafruit.com/product/562

1200mAh battery
https://www.adafruit.com/product/258

Short Headers for Feather
https://www.adafruit.com/product/3002

30AWG silicone wire
https://www.adafruit.com/product/2051

Headers Right-Angled
https://www.adafruit.com/product/1540

M2.5 Hardware Kit
https://www.adafruit.com/product/3299

Timelapse Tuesday

Ramp Walking Toy – NemoMK2
https://cults3d.com/en/3d-model/gadget/walking-nemo-mk2
Walking toys: https://www.youtube.com/watch?v=EwMGOo-xkAk

Community Makes

https://www.prusaprinters.org/prints/7276-pygamer-snap-fit-case/comments#preview-comment pygamer case
https://www.thingiverse.com/make:1016974 zelda sword
https://www.prusaprinters.org/prints/30359-thermal-imaging-camera/comments#comment-173601
https://www.thingiverse.com/thing:5261639 big key switch







Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Chip inventories rise as demand falls

Wearables — Go insane with a membrane (button or keypad)

Electronics — Shift away from basic arithmetic

Python for Microcontrollers — Python on Microcontrollers Newsletter: CircuitPython 8.0 RC 1 Out, Board Guides, and Much More! #CircuitPython #Python @ThePSF @micropython @Raspberry_Pi

Adafruit IoT Monthly — Cat Doorbell, Deep Algae Bloom Detector, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 2/1/2023 Featuring Adafruit Floppy FeatherWing with 34-Pin IDC Connector! (Video)

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.