RFID made easy! RFID Wiz is the easiest way to include RFID in all your projects. Their ONE-TOUCH training system will have you reading RFIDs in no time! Designed for art installations, museums, escape rooms, etc but can be used any time you want to add quick “touch to activate” behavior.
Training your RFID Wiz can be done in three simple steps:
Connect Tag Reader to RFID Wiz Board with the gray ribbon cable. Power it with the 12V power supply.
Learn by placing an RFID tag against the red Tag Reader and tapping the Train button. Read that tag again and you’ll flip the relay, and also power the 5V trigger! Your RFID Wiz is now TRAINED to recognize that tag! Your RFID Wiz can learn up to 5tags.
Erase your RFID Wiz’s memory by pressing the TRAIN button five times quickly. The status LED will FLASH RED three times. Enter TOGGLE mode by pressing the TRAIN button three times quickly. The status LED will glow AMBER.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython 9.2.1, What is DMA, PyConUS 2025 and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
