CircuitPython 7.3.0 Release Candidate 1 Released! @circuitpython

From the GitHub release page:

This is CircuitPython 7.3.0-rc.1, the second release candidate for CircuitPython 7.3.0. It is considered stable, and is available as a release candidate for testing before the final release of 7.3.0.

Notable changes to 7.3.0 since 7.2.5

  • Experimental mDNS support.
  • USB to to Serial/JTAG support for REPL on appropriate boards.
  • Initial experimental USB host support.
  • Merge MicroPython 1.18 changes.
  • Preliminary zlib module support. gzip module will be added later.
  • RP2040 PIO: Background write to a PIO state machine. Looping is possible.
  • RP2040 PIO: wrap and wrap_target support.
  • keypad: scan keystates immediately on creation.
  • Improve NeoPixel timings on many ports, to handle a wider range of devices.
  • Add floppyio, used in conjunction with a library.
  • Allow TileGrid bitmap to be changed.
  • Module support matrix includes frozen modules for each board.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of “ports” that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable:

  • atmel-samd: Microchip SAMD21, SAMx5x
  • cxd56: Sony Spresense
  • espressif: Espressif ESP32-S2
  • nrf: Nordic nRF52840, nRF52833
  • raspberrypi: Raspberry Pi RP2040
  • stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

  • broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
  • espressif: ESP32-S3, ESP32-C3
  • litex: fomu
  • mimxrt10xx: NXP i.MX RT10xxx
  • stm: ST non-STM32F4 chip families

Changes since 7.3.0-rc.0

Fixes and enhancements

  • Restore automatic garbage collection after an import. #6406. Thanks @dhalbert.
  • Add more possible flash chips to certain boards. #6403. Thanks @Neradoc.

Port and board-specific changes

Broadcom

Espressif

i.MX

nRF

RP2040

SAMx

STM

Individual boards

Documentation changes

Build and infrastructure changes

Translation additions and improvements

New boards since 7.3.0-rc.0

Known issues

  • See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:

Thanks

Thank you to all who used, tested, and contributed since 7.3.0-rc.0, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.