New Products 6/15/2022 Featuring Half Sized Premium Breadboard – 400 Tie Points! @adafruit #adafruit #newproducts

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


CircuitPython 8 Poster: Coming soon! Sign up to be notified when this poster is in stock

Can you believe CircuitPython is now in its eighth iteration? That’s right! Join us, Blinka, and the ESP32 maker community as we connect online and build upon the coding future for all makers.

Read more


2 x AA Battery Holder with Knife Switch: We’ve got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With a clicky on/off switch? Easy peasy. Here’s our latest addition in classy Adafruit black: 2 x AA Battery Holder with Knife Switch. What’s so special about ’em? Well with the knife switch you can easily control the flow of electricity to your project.

Read more


NTAG203 (13.56MHz RFID/NFC) Clear Keychain Fob: This is a clear 13.56MHz RFID/NFC Keychain Fob with an NTAG203 chip – often used for train/bus passes, information sharing, and contactless payment, but also found in other systems where a proximity card is desired. The tag contains a small RFID chip and an antenna and is passively powered by the reader/writer when placed a couple inches away.

Read more


USB A Plug to USB C Jack Microadapter: As technology changes and adapts, so does Adafruit, and speaking of adapting, this wee microadapter has a USB A jack (e.g. it will plug into a computer with an A port) and a USB C socket so your older computer or laptop can catch up to the latest USB Type C.

Read more


ESP32-S3 Box Lite – Dock Not Included: The ESP-BOX is a new generation AIoT development platform released by Espressif Systems. The ESP32-S3-BOX is an AIoT development board that is based on Espressif’s ESP32-S3 Wi-Fi + Bluetooth 5 (LE) SoC. The ESP32-S3-BOX provides a platform for developing the control of home appliances using Voice Assistance + touch screen controller, sensor, infrared controller, and intelligent Wi-Fi gateway.

The Lite version excludes the dock that serves as a stand for your device. If you want the full kit and kaboodle, check out this version.

Read more


Small Black T-Bar Hall Effect Fader – 5V: You might recognize this interesting new component from behind-the-scenes studio clips of audio recording equipment or even music videos. A fader is a control device for fading or changing the sound volume, light intensity, or simply the gain on an audio or video signal.

Here is a small, black handheld-size DIY version for your next audio or music (maybe even with a NeoTrellis?) project.

Read more


Half Sized Premium Breadboard – 400 Tie Points: As of June 10, 2022 – This half-size breadboard has been updated to Premium, making plugging and unplugging boards and headers a buttery-smooth operation thanks to upgraded spring clips. Updated design also includes a metal plate.

Read more

New Products 6/15/2022 Featuring Half Sized Premium Breadboard – 400 Tie Points!

Stay in the loop at Adafruit.com/New!

NewImage 43 1 1 1

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


3055 06New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter








Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.